Instruction/ maintenance manual of the product 47869 Harbor Freight Tools
Go to page of 8
AIR MICRO DIE GRINDER ASSEMBL Y and OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .harborfreight.com For technical questions and replacement parts, please call 1-800-444-3353 Model 47869 ® Copyright 2002 by Harbor Freight T ools ® .
Page 2 SKU 47869 Specifications Save This Manual Y ou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. W rite the invoice number on the inside of the front cover .
Page 3 SKU 47869 8. Use eye and ear protection . Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. W ear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
Page 4 SKU 47869 Note : Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool perfor- mance.
Page 5 SKU 47869 Operation For best service you should incorporate an oiler , regulator , and inline filter , as shown in the diagram above. Hoses, couplers, oilers, regulators, and filters are all available at Harbor Freight T ools. 1. Attach air hose to Air Connector (#29) on the end of the Air Hose (#28 ).
Page 6 SKU 47869 Operation (continued) Usage. Note: Always disconnect the Die Grinder from the air compressor hose before changing or adjusting accessories. 1. Use the two Wrenches (#30) to attach accessories. Place the Wrench (#30) on the notch of the Clamping Nut (#25) to secure it.
Page 7 SKU 47869 NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y .
Page 8 SKU 47869 Assembly Drawing 1 2 3 4 5 6 7 8 9 10 3 11 12 13 14 15 16 17 18 19 20 21 22 18 23 24 25 26 27 28 29 30 27 Note: The second Wrench (#30) , the tool oil, and the entire length of the Air Hose (#28) are not shown.
An important point after buying a device Harbor Freight Tools 47869 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 47869 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 47869 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 47869 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 47869 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 47869, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 47869.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 47869. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 47869 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
