Instruction/ maintenance manual of the product 47404 Harbor Freight Tools
Go to page of 13
10” DISC SANDER – BENCH TYPE Model 47404 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed Exclusively by Harbor Freight T ools ® .
Page 2 SKU 47404 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS T ABLE Electrical Requirements 120 V / 60 Hz / 3/4 HP / 13.4 Amps Single Phase / 1,750 RPM Sanding Disc Diameter 10” Sanding Disc T ype Pressure Sensitive Adhesive (PSA) Dust Collection Port 1-3/8” O.
Page 3 SKU 47404 For technical questions, please call 1-800-444-3353. caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up above elbows. 7. DO NOT OVERREACH.
Page 4 SKU 47404 For technical questions, please call 1-800-444-3353. 2. GROUND THIS PRODUCT . The electrical Power Cord/Plug (part #34) for this product is equipped with a grounded, 3-prong Plug. Never remove the grounding prong or modify the Plug in any way .
Page 5 SKU 47404 For technical questions, please call 1-800-444-3353. material faster than it was designed to sand. 12. DO NOT A TTEMPT TO SAND WORKPIECES T OO SMALL TO SAFEL Y HOLD BY HAND. Attempting to hold onto a very small workpiece will bring ngers and hands in dangerous proximity to the spinning sanding disc.
Page 6 SKU 47404 For technical questions, please call 1-800-444-3353. ASSEMBL Y INSTRUCTIONS NOTE: For additional references to the parts listed below , refer to the Assembly Diagram on page 12.
Page 7 SKU 47404 For technical questions, please call 1-800-444-3353. MACHINE ADJUSTMENT INSTRUCTIONS NOTE: For additional references to the parts listed below , refer to the Assembly Diagram on page 12.
Page 8 SKU 47404 For technical questions, please call 1-800-444-3353. 2. The Miter Gauge (part #3) may be angled from 0 to 60 degrees, right or left. T o do so, slightly loosen the Knob (part #1). Move the Miter Gauge horizontally to the right or left until the Pointer (part #5) indicates the desired angle.
Page 9 SKU 47404 For technical questions, please call 1-800-444-3353. OPERA TING INSTRUCTIONS NOTE: For additional references to the parts listed below , refer to the Assembly Diagram on page 12.
Page 10 SKU 47404 For technical questions, please call 1-800-444-3353. INSPECTION, MAINTENANCE, AND CLEANING NOTE: For additional references to the parts listed below , refer to the Assembly Diagram on page 12.
Page 1 1 SKU 47404 For technical questions, please call 1-800-444-3353. P ARTS LIST Part Description Qty . 1 Knob 1 2 Screw (M5 x 6) 1 3 Miter Gauge 1 4 W asher 19 5 Pointer 1 6 Gauge Sliding Bar 1 7 .
Page 12 SKU 47404 For technical questions, please call 1-800-444-3353. NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
Page 13 SKU 47404 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabil.
An important point after buying a device Harbor Freight Tools 47404 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 47404 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 47404 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 47404 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 47404 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 47404, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 47404.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 47404. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 47404 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
