Instruction/ maintenance manual of the product 47050 Harbor Freight Tools
Go to page of 9
MINI AIR DIE GRINDER WITH 5 ACCESSORIES ASSEMBL Y and OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .harborfreight.com For technical questions and replacement parts, please call 1-800-444-3353 Manual Revised 1 1h Model 47050 Copyright 2001 by Harbor Freight T ools ® .
Page 2 SKU 47050 Specications Save This Manual Y ou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover .
Page 3 SKU 47050 Wear a full face shield if you are producing metal lings or wood chips. W ear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. 9. Do not overreach . Keep proper footing and balance at all times.
Page 4 SKU 47050 Note : Performance of the compressor (if powered by line voltage) may vary d epending on variations in local line voltage. Extension cord usage may also affect tool performance.
Page 5 SKU 47050 Operation For best service you should incorporate an oiler , regulator , and inline lter , as shown in the diagram above. Hoses, couplers, oilers, regulators, and lters are all available at Harbor Freight T ools. 1. Attach air hose to Air Connector (#1).
Page 6 SKU 47050 Operation (continued) Usage. Note: Always disconnect the Die Grinder from the air compressor before changing or adjusting accessories. 1. Use the two Wrenches (#35 & #36) to attach accessories. Place the W rench (#36) on the notch of the Spindle (#32) to secure it.
Page 7 SKU 47050 NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y .
Page 8 SKU 47050 Assembly Drawing 33 34 35 Note: Parts 10 through 17 will not be sold separately . Y ou must purchase all of the parts as a set called the Air Regulator Kit (#37) . Note: Y ou may purchase the Mounting Stone Kit (#38) as a set including 2 - 1/4” Mounting Stones and 3 - 1/8” Mounting Stones.
Page 9 SKU 47050 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
An important point after buying a device Harbor Freight Tools 47050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 47050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 47050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 47050 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 47050 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 47050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 47050.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 47050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 47050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
