Instruction/ maintenance manual of the product 46388 Harbor Freight Tools
Go to page of 8
4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://ww w .harborfreight.com Copyright © 2001 by Harbor Freight T ools ® .
SKU 46388 Page 2 Specifications Save This Manual Y ou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover .
SKU 46388 Page 3 6. Use the right tool for the job . Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
SKU 46388 Page 4 of moving parts, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly .
SKU 46388 Page 5 2. All accessories must be rated for at least the RPM speed recommended on the tool's warning label. Wheels and other accessories running over rated speed can fly apart and cause injury .
SKU 46388 Page 6 1. Be sure to follow all safety precautions as listed on Pages 2-5 of this manual. 2. Acquire a Union fitting (not supplied) and screw into the Air Inlet fitting. T ighten with a wrench. 3. Attach a quick-coupler (not supplied) to the Union fitting if desired.
SKU 46388 Page 7 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 46388 Page 8 Assembly Drawing Parts List DESCRIPTION Disc Nut Disc Wheel Screw Spring W asher Disc Cover Gear Shaft Key Ball Bearing Bevel Gear Retaining Ring Ball Bearing Spacer Angle Housing Scr.
An important point after buying a device Harbor Freight Tools 46388 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 46388 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 46388 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 46388 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 46388 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 46388, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 46388.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 46388. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 46388 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
