Instruction/ maintenance manual of the product 46365 Harbor Freight Tools
Go to page of 9
1/2” CROWN AIR ST 1/2” CROWN AIR ST 1/2” CROWN AIR ST 1/2” CROWN AIR ST 1/2” CROWN AIR ST APLER APLER APLER APLER APLER ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at http://www .harborfreight.
SKU 46365 Page 2 Specifications Save This Manual Y ou will need the manual f or the safety w arnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your in v oice with this manual. Write the inv oice number on the inside of the front cov er .
SKU 46365 Page 3 7. Dress properl y . Do not wear loose clothing or je welr y as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footw ear are recommended when working. W ear restrictive hair cov ering to contain long hair .
SKU 46365 Page 4 f or the Air Compressor , it must be of the proper siz e and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. If you are using the tool outdoors, use an extension cord rated for outdoor use.
SKU 46365 Page 5 13 . Do not use this tool if it is not loaded, as this will accelerate wear on the tool. 14. Be sure all hoses and fittings are free from damage and dirt.
SKU 46365 Page 6 Air Connection Note: Air Compressor is not supplied. Y ou ma y use Quick-Couplers and Quic k-Connectors (not supplied) as shown in the diagram above. Do not connect Couplers directly to the Air Inlet. Doing so will increase the overall bulk of the tool and strain the inlet threads.
SKU 46365 Page 7 5. Slide the Magazine Assembly back into place until it clicks. Operation 1. Grip the Body [18] of the Stapler with both hands and press the Nozzle [19] against the surface you wish to staple. Be sure to keep your hands, fingers and other body parts away from the Nozzle.
SKU 46365 Page 8 Assembly Drawing NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 46365 Page 9 W ARRANTY CARD REV 03/06 LIMITED 1 YEAR 3491 Mission Oaks Blvd. • • Camarillo, CA 93011 • (800) 444-3353 ® apply to damage due directly or indirectly to misuse, abuse, negligence or accidents; repairs or arising from the use of our product.
An important point after buying a device Harbor Freight Tools 46365 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 46365 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 46365 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 46365 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 46365 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 46365, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 46365.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 46365. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 46365 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
