Instruction/ maintenance manual of the product 46237 Harbor Freight Tools
Go to page of 19
7” ANGLE GRINDER 46237 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 3 plugs with grounded power tools. Unmodied plugs and matching out - lets will reduce risk of electric shock. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 4 proved for the specic hazards in the work area. Power tool use and care 4. Do not force the power tool. Use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 5 mum speed marked on the power tool. Accessories running faster than their RA TED SPEED can break and The outside diameter and the 5. thickness of your accessory must be within the capacity rating of your power tool.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 6 could snag your clothing, pulling the accessory into your body . Regularly clean the power tool’ s 14. air vents. The motor ’s fan will draw the dust inside the housing and ex - cessive accumulation of powdered metal may cause electrical hazards.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 7 manual cannot cover all possible con- ditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator .
SKU 46237 For technical questions, please call 1-800-444-3353. Page 8 side of cut-off wheel. Abrasive cut- off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter . Always use undamaged wheel 4. anges that are of correct size and shape for your selected wheel.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 9 GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 10 Double insulated tools may be used 2. in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Grounded 1. tools require a three wire extension cord.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 1 1 SPECIFICA TIONS Electrical Requirements 780 W Output .
SKU 46237 For technical questions, please call 1-800-444-3353. Page 12 OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 13 Rotate the wheel 45 degrees and c. repeat the test until the entire wheel has been checked. An undamaged wheel will give a d. clear tone. If cracked, there will be a dead sound and not a clear ring.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 14 General Operating Instructions TO PREVENT SERIOUS INJUR Y : Grip the tool rmly in both hands. Plug the Cord (41) into the electrical 1. outlet. Secure the material being cut. Hold 2.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 15 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 16 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start No power at outlet. 1. Cord not connected. 2. Carbon Brushes may be worn or 3. damaged. Check power at outlet.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 17 PLEASE READ THE FOLLOWING CAREFULL Y .
SKU 46237 For technical questions, please call 1-800-444-3353. Page 18 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts.
SKU 46237 For technical questions, please call 1-800-444-3353. Page 19 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools 46237 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 46237 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 46237 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 46237 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 46237 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 46237, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 46237.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 46237. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 46237 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
