Instruction/ maintenance manual of the product 43753 Harbor Freight Tools
Go to page of 8
STRUT SPRING COMPRESSOR 43753 SET UP AND OPERA TING INSTRUCTIONS This automotive tool is ideal for tire, body , and specialty shops and garages, dealerships, and service stations! Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd.
SKU 43753 For technical questions, please call 1-800-444-3353. Page 2 Specications Capacity 7” Coil Spring Diameter Maximum Opening 8” Hardware T ensile 1 13-128 PSI, Minimum Lead Screw 1 1-3/8.
SKU 43753 For technical questions, please call 1-800-444-3353. Page 3 Stay alert 10. . W atch what you are doing, use common sense. Do not operate any tool when you are tired.
SKU 43753 For technical questions, please call 1-800-444-3353. Page 4 REV 01e, 08l Unpacking When unpacking, check to make sure all of the parts listed on the parts list on page 7 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual.
SKU 43753 For technical questions, please call 1-800-444-3353. Page 5 The Safety Block (#19) will keep the claws from springing open and causing injury . Position the top hooks over the strut springs and tighten the 6. Adjustment Screw (#6) so that the lower hooks will t over the spring.
SKU 43753 For technical questions, please call 1-800-444-3353. Page 6 Make sure the same number of coils are between the hooks on each of the spring. 4. Make sure the hooks are securely fastened and sit in line with the center axis of the spring. See Figure1 on Page 5.
SKU 43753 For technical questions, please call 1-800-444-3353. Page 7 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 43753 For technical questions, please call 1-800-444-3353. Page 8 Assembly Diagram Hex Nut REV 01e.
An important point after buying a device Harbor Freight Tools 43753 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 43753 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 43753 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 43753 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 43753 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 43753, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 43753.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 43753. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 43753 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
