Instruction/ maintenance manual of the product 42977 Harbor Freight Tools
Go to page of 4
Stand for Drill / Mill Machine Model 42977 42977 42977 42977 42977 Assembly & Operating Instructions Copyright © 2000 by Harbor Freight T ools ® . All Rights Reserved. No portion of this manual or any artwork contained herein may be reproduced in any manner , shape or form without the express written consent of Harbor Freight T ools.
SPECIFICA TIONS FEA TURES 1 . This sturdy steel cabinet provides a strong, vibration resistand stand for drill / mill machines. 2 . The machine is positioned at a convenient level for standing operation. 3. Cabinet construction provides secure storage space for machine tools, equipment and accessories.
Page 3 SKU # 42977 ASSEMBL Y AND OPERA TING INSTRUCTIONS Y our machine stand is fully assembled when you r eceive it. However , it must be attached to the floor , and the machine must be mounted on it prior to operation. 1. Find a location for the stand within your workshop.
Page 4 SKU # 42977 #42977 DRILL / MILL MACHINE ST AND PAR TS DIAGRAM MAINTENANCE 1. Keep the stand wiped down and clean. 2. Do not allow the stand to remain wet, and do not allow standing water to accumulate around the base. 3. Use applications of light grease or paint to any unpainted surfaces to prevent rust.
An important point after buying a device Harbor Freight Tools 42977 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 42977 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 42977 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 42977 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 42977 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 42977, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 42977.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 42977. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 42977 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
