Instruction/ maintenance manual of the product 40134 Harbor Freight Tools
Go to page of 7
PVC AIR HORN - 12 VOL PVC AIR HORN - 12 VOL PVC AIR HORN - 12 VOL PVC AIR HORN - 12 VOL PVC AIR HORN - 12 VOL T T T T T WITH COMPRESSOR WITH COMPRESSOR WITH COMPRESSOR WITH COMPRESSOR WITH COMPRESSOR ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd.
SKU 40134 Page 2 Specifications .
SKU 40134 Page 3 6. Dress properly . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair .
SKU 40134 Page 4 18. Use proper size and type extension cord . If an extension cord is required to power tools, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool.
SKU 40134 Page 5 Installation Caution: Installation should be completed by a qualified technician. Before at- tempting installation of the Air Horns, remove the keys from the vehicle igni- tion, and place wheel chocks on both sides of at least 2 wheels.
SKU 40134 Page 6 6. Make the connections to the Compressor (3) and the Electric Relay (5) as shown on the Wiring Diagram. Note: Some vehicles may employ a positive ground. If this is the case, refer to Wiring Diagram Positive Ground. Pay attention to polarity .
SKU 40134 Page 7 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
An important point after buying a device Harbor Freight Tools 40134 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 40134 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 40134 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 40134 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 40134 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 40134, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 40134.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 40134. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 40134 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
