Instruction/ maintenance manual of the product 36572 Harbor Freight Tools
Go to page of 9
1/4” AIR DIE GRINDER 36572 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INSTRUCTIONS BEFORE USE.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the saf ety war nings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, par ts list and assembly diag ram. Keep your in voice with this manual.
3. Keep bystanders, children, and visitors away while operating a pneumatic tool. Distractions can cause you to lose control. Protect others in the work area from debris such as metal filings and sparks. Provide barriers or shields as needed. PERSONAL SAFETY 1.
2. Do not fo rce the tool. Use the correct tool for y our application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use the power tool if the T rigger does not turn it on or off. Any tool that cannot be controlled with the T r igger is dangerous and must be replaced.
SKU 36572 For technical questions, please call 1-800-444-3353 P AG E 5 3. Use clean, dry , regulated, compressed air at 90 PSI. Do not exceed the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
SKU 36572 For technical questions, please call 1-800-444-3353 P A G E 6 2 . Prior to use, the Die Grinder requires the attachment of a quick connector (not included) into its Air Inlet (1). T o do so , wrap appro ximately 3” of pipe thread sealer tape (not included) around the male threads of a quick connector .
SKU 36572 For technical questions, please call 1-800-444-3353 P A G E 7 GRINDING DRUM (NOT INCLUDED) COLLET (28) SP ANNER (30) SP ANNER (30) COLLET NUT (29) SPINDLE (25) FIGURE B 5 . Connect the air supply hose to the quick connector (not included) on the Die Grinder .
SKU 36572 For technical questions, please call 1-800-444-3353 P AG E 8 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Al wa ys make sure the T rig g er (15) is in its “OFF” position, and disconnect the Die Grinder from its compressed air supply before performing any inspection, adjustments, maintenance, or cleaning.
SKU 36572 For technical questions, please call 1-800-444-3353 P A G E 9 P A RTS LIST Part # Description Qty. Part # Description Qty. 1 Air Inlet 1 17 Rear Plate 1 2 Exhaust Deflector 1 18 Ball 3 3 Mot.
An important point after buying a device Harbor Freight Tools 36572 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 36572 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 36572 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 36572 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 36572 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 36572, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 36572.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 36572. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 36572 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
