Instruction/ maintenance manual of the product 35807801 Hans Grohe
Go to page of 8
Installation Instructions / W arranty Axor Steel 35807801.
2 Installer Notes: Significant pressure differences between the hot and cold water supplies should be corrected. The supply hoses on this faucet require 3/8” compression fittings (not included). Backflow prevention is provided by check valve in the sprayhead.
3 Install the faucet: Position the faucet and sealing ring on top of the mounting surface. From beneath, install the plastic washer , slide washer and metal washer . Thread on the collar nut loosely . If the total thickness of the mounting surface is greater than 1 3/8”, omit the plastic washer .
4 Connect the handspray hose: Loosen the compression fitting on the end of the flexible handspray hose. Slide it onto the end of the handspray supply hose. While holding the hose still with a 12 mm wrench, tighten the nut with a 17 mm wrench. DO NOT ALLOW THE HOSE TO TWIST .
5 User Instructions T urn the water on by raising the handle. Lower the handle to tur n the water off. Pivot the handle to the right for cooler water , to the left for warmer water . When the faucet is turned on, the sprayhead is in the stream mode. Press the button on top of the sprayhead to activate the spray mode.
6 1. handle 35891800 1.1 screw cover 94186000 2 flange 97650800 3 nut 94194000 4 M3 cartridge 92730000 5 hose 95048000 6 handspray 35893800 7 aerator 97691000 8 mounting set 95049000 9 check valve 97350000 10 connection hose 96510000 11 hose weight 98551000 12 squeezing connection 96099000 Replacement Parts: 1 1.
7 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996 and installed in either the United States or Canada.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgrohe-USA.com US - Installation Instructions • Part No. 90870404 • Revised 06/2007 THIS W ARRANTY DOES NOT COVER and HANSGROHE WILL NOT P A Y FOR: A.
An important point after buying a device Hans Grohe 35807801 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 35807801 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 35807801 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 35807801 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 35807801 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 35807801, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 35807801.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 35807801. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 35807801 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
