Instruction/ maintenance manual of the product 31261XX1 Hans Grohe
Go to page of 8
Metris 31060XX1 31020XX1 31261XX1 Installation Instructions / W arranty.
2 Metris Single Control Lavator y Mixer 31060XX1 T all Lavator y Mixer 31020XX1 Single Control Bidet Mixer 31261XX1 T echnical Specification Recommended incoming water pressure 22 - 72 PSI Recommended incoming hot water temperature 120 o - 140 o F* Hole size in mounting surface 1 3/8” Maximum mounting surface thickness 1 5/8” Flow rate 2.
3 Installation Place the faucet and the sealing ring on the countertop. From below , install the fiber washer , friction washer and mounting nut. T ighten the mounting nut and the tension- ing screws. Attach the hoses to the supply stops with 3/8” compres- sion fittings (not included).
4 Install the Pop-up Drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to the flange.
5 Reset the High T emperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use the included 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions.
6 Replacement Parts 1 handle 31093XXX 1.1 screw cover 96338000 2 flange 97406XXX 3 nut 97209000 4 cartridge 92730000 5 seal 95008000 6 aerator 13912XXX 7 fixing set 13961000 8 connection hose 96321001.
7 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgr ohe-USA.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe 31261XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 31261XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 31261XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 31261XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 31261XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 31261XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 31261XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 31261XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 31261XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
