Instruction/ maintenance manual of the product HE245DPB(HSG1273) HANNspree
Go to page of 24
LCD Display HE195APB(HSG1249)/HE245DPB(HSG1273).
User ’ s Manual OSD[V5.9] Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual 3 RECYCLING INFOR MATION We, at HANNspree car e very much about our environment protection strategy and firmly believe that it helps us have healthi er earth via appropriate treatment and recycling of indust rial technology devices at the end-of-life.
User ’ s Manual T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 5 PRECAUTIONS .......................................................................................
User ’ s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
User ’ s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may flicker during initia l use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual BEFORE YOU OPERA TE THE MONIT OR FEA TURES Model: HE195 HE245 Size: 47cm/ 18.5” 60cm/ 23.6” • W ide Screen W -LED Backlight Monitor • Crisp, Clear Display for W i ndows • E.
User ’ s Manual INST ALLA TION INSTRUCTIONS INST ALL REMOVE Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Attach the base to the monitor column (Figure 1). 3. Rotate the base as shown in the illustration (Figure 2) until a 'click' is heard.
User ’ s Manual SETTING THE MONIT OR ON TH E W ALL DISSEMBLING THE ST AND BASE: 1. Disconnect all the cables and cords fr om the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surf ace (blanket, foam, cloth, etc) to prevent any damage to the Monitor .
User ’ s Manual MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before perform i ng the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port.
User ’ s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor ’ s angle.
User ’ s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture ca n be adjusted to your personal preferences.
User ’ s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / Return: T urn the OSD menu on/off or return to the previous m enu.
User ’ s Manual Resolution 640×400@70Hz ↔ 720×400@70Hz 640×480@60Hz ↔ 720×480@60Hz 1024×768@70Hz ↔ 1280×768@70Hz 1280×768@60Hz ↔ 1360×768@60Hz 1400×1050@60Hz ↔ 1680×1050@60Hz 140.
User ’ s Manual HOW T O ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display accordin g to your preference.
User ’ s Manual display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indic ates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Manual the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「 OSD TIME-OUT 」 option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level. OSD COLOR T o choose the color combination of the OSD window , select 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/2/3.
User ’ s Manual PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Manual TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only] Addendum related to Windows 7/ Windows 8 When you encounter display problem under Windows 7/ W indows 8, you need to do the following: 1.
User ’ s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connect ed, if the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 27 1440×900 @60Hz 55.469 59.901 ▲ 28 1440×900 @75Hz 70.635 74.984 ▲ 29 1400×1050 @60Hz 64.744 59.948 ▲ 30 1920×1080 @60Hz 67.
User ’ s Manual APPENDIX SPECIF ICA TIONS HE195 Driving system TFT Color LCD Size 47 cm / 18.5” Diagonal LCD Panel Pixel pitch 0,3 mm(H) × 0,3 mm(V) H-Frequency 30KHz – 61KHz V ideo V - Frequency 56Hz – 75Hz Display Colors 16.
User ’ s Manual SPECIF ICA TIONS HE245 Driving system TFT Color LCD Size 60 cm / 23.6” Diagonal LCD Panel Pixel pitch 0,271mm(H) ×0,271mm(V) H-Frequency 30KHz – 83KHz V ideo V - Frequency 56Hz – 75Hz Display Colors 16.
An important point after buying a device HANNspree HE245DPB(HSG1273) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HANNspree HE245DPB(HSG1273) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HANNspree HE245DPB(HSG1273) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HANNspree HE245DPB(HSG1273) you will learn all the available features of the product, as well as information on its operation. The information that you get HANNspree HE245DPB(HSG1273) will certainly help you make a decision on the purchase.
If you already are a holder of HANNspree HE245DPB(HSG1273), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HANNspree HE245DPB(HSG1273).
However, one of the most important roles played by the user manual is to help in solving problems with HANNspree HE245DPB(HSG1273). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HANNspree HE245DPB(HSG1273) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
