Instruction/ maintenance manual of the product SN12E2B Hanns.G
Go to page of 37
U S E R ’ S M A N U A L HannsBook SN12E2 S eries.
T rademark: All trademarks are the property of their respective owners. V ersion: User ’ s Manual V1.0 for Notebook. Symbol Description: Caution : Refers to important information that can help you to use Notebook better , and tells you how to avoid problems.
■ Do not place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. ■ Do not expose to dirty or dusty environment. And Do not operate during a gas leak. ■ Do not leave the Notebook on your lap or any part of the body to prevent discomfort or injury from heat exposure.
T able of Contents Chapter 1 Introduction to Y our Notebook Accessories ....................................................................................................... 2 External Appearance .....................................................
■ Accessories ■ External Appearance ■ Setting Up Y our Computer ■ T ouchpad Usage ■ Special Function Keys Introduction to Y our Notebook 1 Notebook.
2 1 1-1 Accessories Check your product package for the following items: Before your purchase, if any of the above items is damaged or missing, please contact your retailer .
3 1 1-2 External Appearance Refer to the diagram below to identify the components on every side of the Notebook. 1. T op View Y our Notebook keyboard may vary depending on the country/region of purchase.
4 1 No. Item Description 1 Web Camera Records videos or take photos 2 LCD LED backlight panel 3 Power Button Button for turning the computer's power on/off 4 Status Indicators From left to right: a. HDD ● Blinking blue when data is written to or read from the hard disk drive.
5 1 No. Item Description 1 Battery Pack Replaceable battery pack that serves as Notebook's power supply 2 SIM Card Slot (Optional) T o insert the SIM card into the slot and make sure that the gold pins of SIM card are downward.
6 1 3. Bottom View When the computer is running or charging, heat is produced inside the Notebook and transferred to the back of the chassis by the heat dissipation system for cooling. The transformer may also produce a lot of heat during normal use as well.
7 1 4. Left View No. Item Description 1 VGA Port Connects to an external display 2 Power Port Connects to the external power supply 3 V ent Notebook's cooling vent 4 USB Port Connects to USB 2.
8 1 1-3 Setting Up Y our Computer 1. Installing/Removing the Battery Ple ase ins tall the bat ter y bef ore usi ng the Note book and con nec t the ext ern al powe r sup ply transformer . The Notebook can be powered by the battery or the external transformer .
9 1 Do not remove the battery while the Notebook is still running. This may damage the data on the hard disk. C A U T I O N ! Removing the Battery 1. Shut down the Notebook. Disconnect all cables and devices. 2. T urn the Notebook over and unlock the battery by pushing the Battery Lock outwards.
10 1 2. Connecting the Power Supply The AC transformer provides external power source to your notebook and charges the battery pack at the same time. The AC transformer also has an auto-switching design that can connect to any 100V AC - 240V AC power outlets.
1 1 1 2. T urn on the machine by pressing the Power Button. 4. Emergency Shutdown When the Notebook cannot be shut down through normal means, please press and hold the Power Button until the Notebook powers off. 1-4 T ouchpad Usage 1. Introduction to the T ouchpad The touchpad is like a computer mouse.
12 1 2. Single T ap/ Single Click T o select a window function or press a button icon, move your nger across the touchpad to move the cursor to the window or button to select. Now tap the touchpad with your nger to perform the action. This action is equivalent to pressing the left mouse button.
13 1 1-5 Special Function Keys The following denes some special function keys on the Notebook. Function Keys Description Fn + F1 Enter sleeping mode Fn + F2 Switches to the external display Fn + F3.
■ Setting BIOS and Install a new Windows 7 system ■ Install Drivers in Windows 7 Install Windows 7 in Notebook 2 Notebook.
15 2 Install Windows 7 in Notebook Make sure you have these ready: An USB DVD drive, a Notebook driver CD, Windows 7 Install CD Before you continue : ■ Shut down your computer ■ Connect the USB DVD drive to an USB port of Notebook and connect the power cord to AC power 2-1 Setting BIOS and Install a new Windows 7 system 1.
16 2 7. The setup will display the hard disk partitions (160GB, in this example) of your system. If there were other systems (such as Linux) installed previously , you need select them and click “ Drive options (advanced) ” -> “ Delete ” to delete them.
17 2 T o ensure that all Windows features work correctly , Windows might create additional partitions for system les. So you will see a 100MB partition reserved by system after you create a partition. Select the 70GB partition and click “ Next ” to continue.
18 2 10. When the installation is complete, setup will prepare your computer for the rst use. Then you can follow steps to select system settings, create an account, set a password...etc, until the whole process is complete and enter Win dows 7 sys tem .
Recovery of Windows 7 System Notebook 3.
20 3 Recovery of Windows 7 System 1. Power on the computer , when the message " Press F3 to Rescue and Recovery " appears on the top of the screen, press " F3 " to enter the recovery interface. 2. System prepares for the recovery after pressing "F3" key .
21 3 3. Recovery begins after clicking " Start " in the following image. 4. When the following image appears, click " OK " to continue.
22 3 5. Recovery is accomplished when the following image appears, click " OK " to nish it. 6. Now , click " Restart " to reboot the system.
■ Overview ■ Recovery of Linux system Introduction to the Linux System Notebook 4.
24 4 4-1 Overview After turning on the Notebook, when you log in Linux system, the following screen will appear: Click " Setting " to open the page to optimize the system. Click " Help " to open the page, please refer to the content of the page about detailed description of the system.
25 4 4-2 Recovery of Linux system ● From DVD to recover system 1 Boot from DVD Power on the computer , insert the system Installation DVD into the DVD drive, press " F1 1 " to select booting system from the DVD drive.
26 4 5 After installing, click " Reboot " to restart the system..
27 4 ● From hard disk to recover system 1 When you log in, according to the screen suggestion, press any key to enter Grub interface, the gure is shown as below: 2 Select " FoxOS recovery &q.
28 4 4 Click " Next " to format partition(hd0,0) and recover system from hard disk. The gure is shown as below: 5 When the process is completed, please reboot the system.
■ Product Specication ■ Notebook F AQ Appendix Notebook Appendix.
30 Appendix CPU ● Intel CUL V CPU FSB 800MHz *: The CPU type depends on model you purchase, please refer to the physical product. Chipset ● Intel GS45 + ICH9M Memory ● 1 x DDR3 SDRAM socket ● SODIMM,DDR3 1,066 1GB ● SODIMM,DDR3 1,066 2GB(Optional) LCD ● LED backlight panel, 12” WXGA, resolution 1366 x 768 Storage ● SA T A 2.
31 Appendix I/O Ports ● 3 x USB 2.0 port ● HDMI ● 1 x VGA port ● 1 x RJ-45 LAN port ● 1 x Headphone port ● 1 x Microphone In port ● 1 x MS/SD/MMC card reader slot ● 1 x DC-in port ● .
32 Appendix Notebook F AQ 1. A: Does the HDD shock-proof designed? B: Y es, it does. 2. A: Can I expand the RAM stick? B: It depends on your products specication, if you get one with 1GB, you can expand it up to 4GB. 3. A: Could the VGA share memory be adjusted in BIOS? B: No, it could’t.
33 Appendix 13. A: What to do when I forget the BIOS or Linux password? B: Please contact with local sevice center to resolve the problem. 14. A: How to get Windows 7 driver? B: From DVD with your Notebook.
An important point after buying a device Hanns.G SN12E2B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hanns.G SN12E2B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hanns.G SN12E2B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hanns.G SN12E2B you will learn all the available features of the product, as well as information on its operation. The information that you get Hanns.G SN12E2B will certainly help you make a decision on the purchase.
If you already are a holder of Hanns.G SN12E2B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hanns.G SN12E2B.
However, one of the most important roles played by the user manual is to help in solving problems with Hanns.G SN12E2B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hanns.G SN12E2B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
