Instruction/ maintenance manual of the product 165 474 Hampton Bay
Go to page of 17
Glendale 52 in Ceiling F an Owner ’s Manual Glendale Ventilador de Techo de 1,32 m Manual del Propietario 165 474.
52” Glendale Ceiling Fan by Hampton Bay Date Purchased Store Purchased UL Model No. Serial No. V endor No. UPC Thank you for purchasing our ceiling fan. This product has been manufactured with the highest standards of safety and quality . T able of Contents Safety Rules .
Safety Rules – Read and Save These Instructions 1 To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes.
2 Unpacking Your Fan Unpack your fan and check the contents. You should have the following items: AB C 1 2 4 6 8 9 7 5 3 D Set of blades (5) Canopy assembly Ball/downrod assembly Fan motor assembly Set of blade arms (5) 1. 2. 3. 4. 5. Light kit Glass shades (3) 13 Watt compact fluorescent bulbs (3) Pull chain and fobs (2) 6.
3 Installing Your Fan Figures 1~3 are examples of different ways to mount the outlet box. Phillips screwdriver, straight slot screwdriver, step ladder and wire cutters. If there isn't an existing UL listed mounting box, then read the following instructions.
4 4 REMEMBER to turn off the power. Follow the steps below to hang your fan properly. NOTE: This ceiling fan is supplied with two types of hanging assemblies; the standard ceiling installation using the downrod with ball and socket mounting, and the "close-to-ceiling" mounting.
5 Option 2: Close-to-Ceiling Mounting WARNING FAILURE TO COMPLETELY TIGHTEN THE THREE SCREWS IN STEP 7 COULD RESULT IN FAN LOOSENING AND POSSIBLY FALLING. Figure 10 Motor Collar Screw and Lock Washer (3 of 6 Places) Remove the canopy ring from the canopy.
6 Installing Fan to the Electrical Box WARNING THE TAB AS SHOWN IN FIGURE 12 IS ONLY TO BALANCE THE FAN WHILE ATTACHING WIRING. FAILURE TO HANG AS SHOWN IN FIGURE 12 MAY RESULT IN TAB BREAKING CAUSING THE FAN TO FALL. TAB MUST PASS FROM INSIDE TO OUTSIDE OF CANOPY.
7 Making the Electrical Connections WARNING CHECK TO SEE THAT ALL CONNECTIONS ARE TIGHT, INCLUDING GROUND, AND THAT NO BARE WIRE IS VISIBLE AT THE WIRE NUTS. EXCEPT FOR THE GROUND WIRE. WARNING ELECTRICAL DIAGRAMS ARE FOR REFER- ENCE ONLY. OPTIONAL USE OF ANY LIGHT KIT SHELL BE UL LISTED AND MARKED SUITABLE FOR USE WITH THIS FAN.
8 Finishing the Fan Installation Standard Ceiling Mounting WARNING MAKE SURE THE TAB ON THE HANGING BRACKET PROPERLY SITS IN THE GROOVE IN THE HANGER BALL BEFORE ATTACHING THE CANOPY TO THE BRACKET BY TURNING THE HOUSING UNTIL IT DROPS INTO PLACE. WARNING LOCKING SLOTS OF CEILING CANOPY ARE PROVIDED ONLY AS AN AID TO MOUNTING.
9 Attaching the Fan Blades Attach blades to blade arms using three screws with fiber washers. (Fig. 17) Start a screw into the blade arm, do not tighten. Repeat for the 2 remaining screws and washers. Tighten each screw securely starting with the center screw.
10 Blade Balancing Figure 19 Check that all blade and blade bracket screws are secure. Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the center of each blade to the point on the ceiling.
11 Installing the Light kit CAUTION BEFORE STARTING INSTALLATION, DISCON- NECT THE POWER BY TURNING OFF THE CIRCUIT BREAKER OR REMOVING THE FUSE AT FUSE BOX. TURNING POWER OFF USING THE FAN SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRIC SHOCK. NOTE LIGHT BULBS HAVE NO WARRANTY; CAN BE PURCHASED AT ANY HOME DEPOT STORE.
12 Operating Your Fan Warm weather - (Counter Clockwise Direction) A downward air flow creates a cooling effect as shown in Figure 22. This allows you to set your air conditioner on a higher setting without affecting your comfort. Cool weather - (Clockwise Direction) An upward air flow moves warm air off the ceiling are as shown in Figure 23.
13 WARNING MAKE SURE THE POWER IS OFF AT THE ELECTRICAL PANEL BOX BEFORE YOU ATTEMPY ANY REPAIRS. REFER TO THE SECTION, “MAKING ELECTRICAL CONNECTIONS”. Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year.
14 Specifications FAN SIZE SPEED VOLTS AMPS WATTS RPM CFM N.W. G.W. C.F. 52” 120 8.5 kgs (18.7 Ibs) 9.2 kgs (20.2 Ibs) 1.71’ LOW MED. HIGH 0.21 0.38 0.51 12 35 63 65 115 160 1800 3700 5450 These are approximate measures. They do not include Amps and Wattage used by the light kit .
15 The Hampton Bay warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser.
An important point after buying a device Hampton Bay 165 474 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hampton Bay 165 474 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hampton Bay 165 474 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hampton Bay 165 474 you will learn all the available features of the product, as well as information on its operation. The information that you get Hampton Bay 165 474 will certainly help you make a decision on the purchase.
If you already are a holder of Hampton Bay 165 474, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hampton Bay 165 474.
However, one of the most important roles played by the user manual is to help in solving problems with Hampton Bay 165 474. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hampton Bay 165 474 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center