Instruction/ maintenance manual of the product XQSB60-JN Haier
Go to page of 20
This manual is for Please read this manual carefully before using. Retain it for future reference. XQSB60-JN User's manual Environment-friendly d ouble-driver automatic washing machine 0030806318.
Names of the parts..................................................1 Safety precautions ................................................2 Installation and adjustment ..............................4 Install the water inlet hose........................
Names of the parts Top lid handle Adjustable leg film Water absorption cushion Drain hose Back cover Water inlet valve Inner cover component Detergent box Control panel Outer tub cover Balance ring In.
2 Do not wash water-proof laundry like the raincoat, bike covers etc. To avoid abcommon vibrations in spinning and damages to the laundries. In common usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand.
3 Safety precautions Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. T ake special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not decompose, repair or alter the machine by yourself.
4 Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Installation and adjustment After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.
5 Usage the drain hose The washing machine away from wall should be overrun 20mm. The largest allowable slope of the shank base of the machine is 1 .The slanting or rough ground will result in unstable running or stoppage of the machine.
6 Install t he water in let h ose 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE : Do not over tighten. Damage to the valves can result. 2. Connect the other ends to the water inlet valve .
7 1.After using, Close the water tap. 2. Pull off the water inlet hose from the water tap and washer Take down the water inlet hose Check the connection between the jointer of the water inlet hose and the water tap 1. Swing the hose gently to confirm if it is fastened stable.
8 1 P reparation before washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running ,the buttons of the laundries may cause noise.
9 How to use the bleacher The usage and dose of the softener as per the specifications of softener. Before washing put the softener into the filling entrance(can be found on the balancing ring by rotating the inner tub, as illustrated in the left drawing, please refer to P1 graphics) The softener will put into the washer when rinsing.
6 Use the operation buttons a. Description of the function of buttons Mode and meaning of the indicators On: indicate the program about to run, or indicate the selected mode Digital tube During sensin.
Program common Quick Posthaste Jean Standard Cotton Silk Gentle Pr og ram se lectio n b utt on Following automatic programs are available for selection Washing the relatively big and thick laundries S.
b.Steps of using the operation buttons and description of the steps 1.Push the "POWER ON/OFF " button to switch on the power. PROGRAM After switching on the power , the machine will set common program automatically. T o select other automatic program, push the "program" button till the relative indicator is on.
After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To se lect other procedures, push the "soak", " wash", " rinse" or "spin" button to select the time of soak, wash and spin, and the times of rinse.
7.Push the "START/P AUSE" button 7 Finish washing 6.Push the "RESERVE" button to select suitable reserve wash program RESERVE After switching on the power, th e reserve program is set to off mode automatically .
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months.
16 The digitron displays E0. The safety switch acts, and the spinning cannot work. The digitron displays E3. The water filling does not work, or is slow. Aft er about 30 minutes later , the digital displays E4. The drainage cannot work, or is too slow.
Packing list Name User's manual Quantity One One Inner cover component Components of the water inlet hose Four Tapping screws Bottom plate One (Between the upper cushion of the washing machine pa.
18 Specification This washer can run for ten years (equivalent times) if using the no washing powder function and running three times weekly . After running up to the above number this washer can still be used as a common double-driver washer. Water level/Water quantity(about) Injection pressure ~ 0.
An important point after buying a device Haier XQSB60-JN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier XQSB60-JN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier XQSB60-JN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier XQSB60-JN you will learn all the available features of the product, as well as information on its operation. The information that you get Haier XQSB60-JN will certainly help you make a decision on the purchase.
If you already are a holder of Haier XQSB60-JN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier XQSB60-JN.
However, one of the most important roles played by the user manual is to help in solving problems with Haier XQSB60-JN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier XQSB60-JN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
