Instruction/ maintenance manual of the product XQBM30-22 Haier
Go to page of 20
Mini magical child Names of the parts.............the 2 nd cover Safety precautions .......................1 Introduction of the special functions.........3 Installation and adjustment ..................3 Install the water inlet hose............5 Preparation before washing .
Meaning and description of the symbols Honorable users, Thanks for your choosing Haier products. Haier products integrate high-tech, precision frontier science and possess the best quality among simila r products. T o facilitate your operation, please read the manual carefully and operate this machine according to it.
Before Using Before Using Safety precautions Be sure to use three-phase power receptacle. Ensure that the earth terminal of the power receptacle is earthed reliably . If the power line is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or our agent or the after-sale service department.
Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine.
The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Adjust the adjustable foot: Hang the lead line to confirm if it is horizontal.
1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way . 2. Do not ramp or press the drain hose. If the drain hose is too long, cut it at mid point. T o make smooth drainage, cut the front end of the hose slantingly.
Water faucet,suitable Water faucet,not suitable It is required that the front end shall be longer than 10cm. The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2. Loosen the screw till the water faucet can be accessed.
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately . 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut.
Confirm if there's special requirment for the laundries. Clear the pocket. T ake out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion,please put the laundries with buttons into other laundries.
Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition (as per the laundries stipulated in the A2 Attachment of GB4288-1992 standard) that can be washed or spinned in one time.
How to use the whitener Fill water to decided level. Dilute the whitener with container . Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color . The whitener shall not touch the laundries directly .
a. Mode and meaning of the indicator light Flashing: indicate the running program Flashing rapidly: indicate abnormal condition On: indicate the program about to run, or indicate the selected mode Pro.
Push the "On/Off" button to switch on the power . When the power is on, push it again to switch off the power . "Power On/Off"button "Start/Pause"button "Water level.
After switching on the power, the machine will set to standard program automatically including "wash-rinse-spin". T o select other program, push the "Procedure selection" button to select one or more programs among "quick wash" "twice wash" "wash" "rinse" "spin".
Even there's no water in the tub, the spinning will start after a certain period. Do not use the "twice wash" program for the woolen laundries. Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level.
T otal time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level.
1.After washing, close the water faucet. (If needed, you can dismantle the water inlet hose). 2. Do not store water in the washing machine for a long period. Drain the water completely after each using. 3. Be sure to pull off the power plug before maintenance.
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company .
Honorable users: Thank you for using Haier series washing machine. We will offer you following services according to the stipulation in the Act on Protection of Consumers' Rights and Interests by evidences of your Guarantee certificate and invoice: 1.
Executive standard: GB/T4288-1992 Household Electric W ashing Machine Address: Haier Park, Haier Road, Qingdao Hi-tech Industrial District, Qingdao, China P .
An important point after buying a device Haier XQBM30-22 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier XQBM30-22 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier XQBM30-22 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier XQBM30-22 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier XQBM30-22 will certainly help you make a decision on the purchase.
If you already are a holder of Haier XQBM30-22, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier XQBM30-22.
However, one of the most important roles played by the user manual is to help in solving problems with Haier XQBM30-22. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier XQBM30-22 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
