Instruction/ maintenance manual of the product XQB50-20 Haier
Go to page of 20
XQB50-20 Part specialized code 0030504485 The product is used only in the Chinese continent..If other countries or areas need it, please contact us . Before using User's manual Fuzzy Logic Automatic Washing Machine Contents Names of the parts....
Adjustable foot Adjustable foot labal Cabinet Base Control panal Control panel film Pulsator T op lid component Power line Location for lint filter Fixed foot(3) Back cover Drain hose Cabinet handle H.
Before Using Before Using Safety precautions 1 The ventilation holes at the bottom In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet. Do not put the machine at damp place like the bathroom.
Before Using Before Using Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine . Do not wash laundries with volatile materials (such as thinner, petrol etc.
After switching on the Power , select the memory programme(the tube on).Then select appropriate time of SOAK, WASH and SPIN and the time of rinse on need.
1 Loosen the fastening screws of the back cover,unpack the back cover gently, avoiding to break the clip claw . Figure 1 3 Stretch out the drain hose to the right of the frame from the groove. Fasten it in the base frame with the drain hose support, and fasten the screws.
Water faucet, suitable Water faucet, not suitable It is required that the front end shall be longer than 10cm. The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2. Loosen the screw till the water faucet can be accessed.
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut.
Preparation before washing 1. Connect the water inlet hose. 2. Confirm that the washing machine is earthed reliably. Then inse rt the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose.
Reference weight of the laundries: working suit(up,down) Jeans(about 800g) The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition (as per the laundries stipulated in the A2 Attachment of GB4288-1992 standard) that can be washed or spun in one time.
Detergent box Softner dispenser Location for liquid bleacher Control panal Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color.
When the tube Press the RINSE button to set the process of RINSE. During the NORMAL or COTTON program, press the RINSE button to setdifferent times( 1234 times).
POWER ON / OFF START PAUSE RESERVE PROGRAM Reserve(hours later) XQB50-20 NORMAL MEMORY Fuzzy ON/OFF button Press the ON/OFF button to switch on the power After the power is on,another press will switch off the power. After the power is on, if not press the START/P AUSE button, the washing machine will be shut-off 5 minutes later automatically.
.
Time list of each program WITHOUT SELF-EDIT PROGRAM The soak program can be used as fitting of the STANDARD , COTT ON, JEANS and FIBRE automatic programs.
Using process Using process * * * * Total time: including the normal water inlet time and drain time. Spin time: the time from intermittent run ning to finishing When selecting SOAK program, first soak for 10-40 minutes, then do wash, rinse, spin. The total washing time may be influenced by the water inlet pressure and water level.
Using process Using process 7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise, it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.
Are the laundries put slantingly in spinning? Is the water pressure too low? Is the screw of the jointer of water inlet hose loose or awry? The water tap leaks There's abnormal sound inside the machine Fasten the screw of the jointer properly.
Packing list 17 User's manual Name Warranty card Quantity Storage position Lint filter Inside the document bag Bottom plate One One One One Five One Inside the document bag Inside the document ba.
Specification Specification Model XQB50-20 Rated voltage frequency 220V-240V/ 50Hz Rated washing / spinning capacity 5 .0kg (weight of standard dry cloth) Water level/Water quantity (about) Max water consumption Injection pressure 0.
An important point after buying a device Haier XQB50-20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier XQB50-20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier XQB50-20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier XQB50-20 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier XQB50-20 will certainly help you make a decision on the purchase.
If you already are a holder of Haier XQB50-20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier XQB50-20.
However, one of the most important roles played by the user manual is to help in solving problems with Haier XQB50-20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier XQB50-20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
