Instruction/ maintenance manual of the product WQP4-1A Haier
Go to page of 18
DOMESTIC DISHWASHER WQP4-1A Code:012050 GB.
Flash wash Intelligently programmed with 6 washing programs available for selection, which are rinse, standard wash, intense wash, rinse with drying, standard wash with drying and intense wash with dring.
Dishwasher This unit is a tableware-cleaning dishwasher. It sprays hot water with detergent on the tableware, then flushes with clean water. Used when opening or closing the door. Be careful not let the door open accidentally. Handle First push, on; Second push, off.
PARTS AND FUNCTIONS Control panel Powered on when pressed down, powered off when released. On/Off switch Drying indicator The lamp twinkles to indicate the ap- pliance is under the drying process. The lamp lights when the drying pro- cess is coming on.
special power socket K K The legend indicates"forced execution" Warning If it treated wrongly, it may lead to death or serous injury. It indicates guessed accident. SAFETY It shows items. The contents are as the follows: Caution If it is treated wrongly, it may leads to injury.
KRK Do not use the unit outdoors. Forbidden If it is used in wet environment, it may lead to electric leakage or electric shock. Never touch the power plug, electric parts, nor operate the power switch with wet hands. Do not use the unit as flush dishwasher.
SAFETY Do not touch detergent with hands when you use it. Avoid it enter your eyes. Warning When abnormal phenomenon appears, turn the power switch to"off", take off the power plug, or cut off the main power supply and get in touch with haier After-sales Service Center at once.
Tightly screw the tighting nut on the inlet pipe into the water valve. Water valve Tighting nut BEFORE OPERATION Warning Intallation should be done by experts. If the customer installs it improperly, it may cause water leakage, electric leakage or fire.
Program OPERATION INSTRUCTIONS Program selection 1. There are six types of washing program available for selection, which are normal wash, intense wash, prewash, normal wash with drying, intense wash with drying and prewash with drying. 2. Press the On/Off switch and then indicators for drying and standard wash illuminate.
A.Shelf(The container which dishes are put in is called shelf). Caution Forbidden Do not wash non-heat-resistant tableware: such as lacquer-coated containers,alumi- num or silver food containers.
Select proper program . The program indicator lights in 5 sec- onds and the wash process starts. OPERATION INSTRUCTIONS C.Dish washing 1.Switch on the appliance. Press the On/Off switch and the indicators for drying and stan- dard wash illuminate. 2.Program selection 3.
MAINTENANCE Daily Maintenance 1. Take out the filter after draining is finished, and the washing box is cooled. 2. Remove residues on the filter. Then, wash and clean it. 3.Mount the filter back after the water on it is dried. Weekly Maintenance Warning Do not flush the dishwasher directly with water.
MAINTENANCE 2.Cleaning the door and washing box. 1) Clean them with a piece of wet cloth. Often wash them with special detergent without dishes inside the unit to keep clean. 2) Check the door seal strip for damage. Damaged or cracked seal may lead to water leakage.
Disorder Possible causes Trouble The indicators for drying, prewash and normal wash illu- minate and the buzzer buzzes. No water supply * The tap is turned off. * There is no water in the pipe. * The pipe is blocked. * The water pressure is too low. The indicators for drying, nor- mal wash and intensive wash illuminate and the buz-zer buzzes.
1) Shut off the power, make a check and take measures as described in the follows: 2) Make a test run after faults have been eliminated. 3) When the above phenomena appear again, take off the plug and contact one of the maintenance departments.
When you have any questions or the product has any abnormal phenomena, please contact our mainte- nance department or the nearby after-sales service center for consultation or service. When you ask for service, please give us your name,address, telephone number, name and type of the product.
TECHNICAL SPECIFICATIONS AND PACKING LIST Packing List Technical specifications Power supply 220-240V~ 50Hz Wash pump 50Hz 120W Heater 50Hz 1100W Max. Power consumption 50Hz 1250W 440X515X540mm About .
Quantity of dishes ILLUSTRATION OF DISHES ARRANGEMENT Bowl-------------4pcs Small dish------4pcs Soup bowl-------4pcs Big dish----------4pcs Glass------------4pcs Knife Cup------------4pcsc Fork Please arrange the dishes as illustrsted. Please arrange the dishes as illustrsted.
An important point after buying a device Haier WQP4-1A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier WQP4-1A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier WQP4-1A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier WQP4-1A you will learn all the available features of the product, as well as information on its operation. The information that you get Haier WQP4-1A will certainly help you make a decision on the purchase.
If you already are a holder of Haier WQP4-1A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier WQP4-1A.
However, one of the most important roles played by the user manual is to help in solving problems with Haier WQP4-1A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier WQP4-1A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
