Instruction/ maintenance manual of the product WQP12-BFE Haier
Go to page of 12
Dishwasher WQP12-BFE GB 0120504191.
.1. NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential to safe and proper installation, use and maintenance of the appliance.
.2. Close-up View (Interior) A B C D E Upper Rack Rack Height Adjustor Top Spray Arm Lower Rack F G H I Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser Third Sprayer Technical characteristics Width 60cm Depth 60cm Height 85cm Capacity 12 standard place settings Mains water pressure 0.
Water Hardness Clarke degrees mmol/l Selector position Salt consumption (Grams/cycle) Autonomy (cycles/2kg) 0 14 M NT M NIT NIU QIQ NU QQ NQ PS PS TN QR UV QIR UIV [UV [TN [UIV L =?J? jba L M OM QM SM ?H? SM QM OR Salt Salt The hardness of the water varies from place to place.
.4. GB Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table." The detergent dispenser is located on the inside panel of the door.
.5. GB Loading the Dishwasher Before placing the dishes in the dishwasher, remove large food particles to prevent the filter from becoming clogged, which re- sults in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed.
.6. GB Turning on the Appliance Starting a wash cycle After having completed all of the installation steps in the preced- ing paragraphs, turn on the water all the way and press the ON- OFF button (A) located on the control panel. The "B" indicator light will come on.
.7. GB - It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odours from forming and food from caking onto the dishes,you can run the soak cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Wash Cycle Table .8. GB Pre-wash: 5g Extended wash: 25g Cycle Cycle Selection Information Description of Cycle Detergent Rinse Aid Normal wash (EN50242) Intensive Wash Rapid Wash Soak Normally dirty dishes,pots and pans without dried-on residue Very dirty dishes,pots and pans.
.9. GB Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
.10. GB Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned on the right or the left to facilitate proper installation.
Installation Installation.
An important point after buying a device Haier WQP12-BFE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier WQP12-BFE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier WQP12-BFE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier WQP12-BFE you will learn all the available features of the product, as well as information on its operation. The information that you get Haier WQP12-BFE will certainly help you make a decision on the purchase.
If you already are a holder of Haier WQP12-BFE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier WQP12-BFE.
However, one of the most important roles played by the user manual is to help in solving problems with Haier WQP12-BFE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier WQP12-BFE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
