Instruction/ maintenance manual of the product QBJ1-130A58E Haier
Go to page of 16
Instruction for use QBJ1-130A58E QBJ1-150A58E QBJ1-175A58E QBJ1-200A58E QBJ1-230A58E QBJ1-270A58E Please read this manual before usage Retain it for future reference Solar Water Heater.
.
Content Features Before use Assembly Instruction Appearance and parts T echnical parameter 1 1 1 2 3 4 5 5 5 6 7 7 8 11 11 10 Precautions Notice T echnical data 4 The location Exterior and installatio.
Technical data 1 1. Inner cylinder: 2. Insulation: Polyurethane foam, thickness-45 mm, good heat preservation ef fect. 3. Outer shell: Aluminium / zinc coated steel sheet. 4. Frame: Steady structure, shapely and durable . SUS 304 stainless steel, food grade.
Precautions Precautions 1. 2. Avoiding irradiation without water after installation, it can't be used immediately , it should be sheltered. 3. When supplying water at the first time, it should be.
Before use 3 Notice Please take time to read this manual and familiarize yourself with the function of this production. 1. Please check out the packing list. 2.If you fix electric auxiliary heating and controller , please select Haier equipped products.
Assembly Instruction Notice: The solar water heater shall be installed by professional. Exterior and installation dimension: 4 Models Exterior dimension(mm) Installation dimension(mm) 1. Please install the solar water heater in the area that avoid the thunder.
T ank assembly 1. Unpacking the tank, rip off the protection film. Uninstall the nut and cushion. 2. Place tank onto tank bracket cradle, inserting protruding bolts into holes. fasten with nuts. Notice: 1. Rip off the protection film after the installation to avoid the destroy of the tank, and please don't use the sharp tool.
Assembly Instruction Glass tube assembly 1. Keep tubes out of the irradiation while assembling the unit or a scald may be caused. 2. Place the rounded side of rubber seal downwards on the open end of tubes.(A) 3. Insert the tube into base support of locating hole with gentle pressure and twisting motion.
Extraventricular plumbing instructions Assembly Instruction 7 Air supply pipe Over flow pipe Over flow hole ( conect to the room A Indoor plumbing instructions Inlet/outlet hole (1/2 ), conect to the .
1. Any alteration to the structure of the solar water heater may cause the trouble while using it. 2. There are 5 connection methods of the water pipe into the room, they are smoke way, vent-pipe hole on the wall appropriative solar well prepared cannula and the first three kinds are common.
Assembly Instruction Pipelines thermal insulation notice 1.Outdoor pipelines should be thermal insulated according to local climate, bad thermal insulation may lead to heat loss. 2.The outlet used by electric tracing belt must ground reliably . The rated current of outlet is less than 10A, ensure is connected to plug reliably .
10 Assembly Instruction Using Instruction 7.If the controller you choose has automatic water supply function, electromagnetic valve must be fixed in room horizontally; the direction of arrowhead labled on valve is the direction of water running out.
Troubles treatment Phenomenon No water supply The temperature isn't high enough Possible reason The tank is empty The pipeline or the connection is impeded The evacuated tubes have damaged The wa.
.
Rev. 01 Specific Number 0040500680F Made in China.
An important point after buying a device Haier QBJ1-130A58E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier QBJ1-130A58E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier QBJ1-130A58E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier QBJ1-130A58E you will learn all the available features of the product, as well as information on its operation. The information that you get Haier QBJ1-130A58E will certainly help you make a decision on the purchase.
If you already are a holder of Haier QBJ1-130A58E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier QBJ1-130A58E.
However, one of the most important roles played by the user manual is to help in solving problems with Haier QBJ1-130A58E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier QBJ1-130A58E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
