Instruction/ maintenance manual of the product ADRL3TRK American Dynamics
Go to page of 34
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 1 of 34 SensorRail ™ IIIE ADRL3TRK Series SpeedDome ® Ultra Programmable Dome on a Rail Installation Guide CAUTION: Only a certified installer is authorized to install this equipment.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 2 of 34 Product Features Vision area (for surveillance), dead zones (for stopping), and maintenanc e areas (for servicing) Side.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 3 of 34 Before You Begin IMPORTANT! Proper installation requires: • Observing safety guidelines • Analyzing the ceiling str.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 4 of 34 Parts Supplied Note: The number of parts suppli ed depends on the length of the rail. • Rail section package, which includes: - 2.5m (8.2ft) straight rail sections - 2.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 5 of 34 Installation Steps The following step numbers refer to pull-out drawings at the end of this document. CAUTION: Perform all ste ps carefully and methodically. DO NOT skip steps! 1.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 6 of 34 2. Install PVC Holders PVC holders carry copper strip s that the trolley uses to get power and sen d and receive data. These holders lie underneath the top surface of the rail.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 7 of 34 4. Install Rail Sections Rail sections connect end-t o-end to create the camera route. Repeat this proced ure for each rail section until the total rail is complete, as straight as possible, and uniformly butted.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 8 of 34 5. Install Anti-Sway Cables The single row of threaded rods can cause the rail to potentially swing. To prevent this: • Install two anti-sway cables at each en d of the rail.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 9 of 34 6. Insert Copper Tracks and Trolley Stop/Retrieval Tool Four copper tracks feed 27 Vdc power and RS-232 data to the camera trolley.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 10 of 34 4. Pull the trolley along the entire rail u ntil the trolley and copper tracks exit the other end of the rail. IMPORTANT! While pulling the service trolley, hand push the service block with the tape attached to where it touches the spring at the end of the rail.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 11 of 34 8. Install the PowerRail Module The PowerRail module: • Converts RS-422 signal s from the video controller to RS-232 signa ls.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 12 of 34 9. Install the Camera Trolley As the camera trolley moves along the rail, it transmits video and camera data to the PowerRail module, which sends them to a monitor via a video controller.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 13 of 34 10. Attach Light Reducing Sections Light reducing section s are not used by the camera trolley, but rather to reduce light that can enter the cowling from the ends of the rail.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 14 of 34 13. Configure the System Equipment Required for this Operation • Laptop • AD SensorRail Control application. Procedure A. Power up the rail. Flip the main switch located on the PowerRail module.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 15 of 34 6. Note the trolley mileage by doubleclicking the Output 2 LED at the bottom of the screen. The monitor temporarily displays the software version and mileage in kilometers.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 16 of 34 15. Install End Covers Tools, Equipment, and Parts Required • Proper lift equipment (scissor lift with extended work platform is recomme nded) • End covers (2) • Cover screws (8).
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 17 of 34 Ordering Parts PowerRail ADRL3PWRLP SensorRail III, PowerRail complete 27Vdc, with RF Receiver, antenna PAL ADRL3PWROP.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 18 of 34 Product Code Description Rail ADRL3TRACKU SensorRail III, full rail 5m (16,4ft), wi th PVC holder, 4 jointing plates, .
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 19 of 34 Product Code Description Mirrored Cowling ADRL3BUL10U SensorRail III, mirrored cowling 10m (32,81ft), universal ADRL3B.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 20 of 34 Specifications (Excluding Dome Camera) Operational Maximum rail length .................................. 100m (328.1ft) Video travel distanc e .........................
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 21 of 34 Declarations Regulatory Compliance Emissions .................................................. EN 610 00-3-2 EN 61000-3-3 Immunity .....................................
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 22 of 34 2 A 5cm B 1 A D B C 5cm (2in) 2.5m 2.5m 90cm 50cm 10cm 1 2 3 30cm 1.25m 2.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 23 of 34 A C 3 4 2 1 3, 4, 5, 6… B A C D B D.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 24 of 34 5 A D B C G E F SIDE VIEW TOP VIEW Eyele t locati on Right Way for Maximum Cable Strength.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 25 of 34 6 D C E F G A B C I J H Screws (6).
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 26 of 34 7 A B.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 27 of 34 Track 1 2 3 4 Rx Tx PowerRail 27Vdc Ground 1 2 3 4 Track PowerRail B 8 A E F C.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 28 of 34 00 1 C 15cm D 3mm 9 A B.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 29 of 34 10 11.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 30 of 34 12 13 DB25 Female (PowerRail side) DB9 Female (PC side) 2 3 7 2 3 5 To PC ST3 ST4 Conv PC PowerRail.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 31 of 34 15 x2 Cowling Plastic Card 14 Mirrored (external) Side Direction of Ply A B C.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 32 of 34 Appendix A: RF link DIP switch settings If 2.4GHz devices interfere with the SensorRail, select one of the following alternat e frequencies using the four- position DIP switch located on the tran smitter board of the trolley.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 33 of 34 Appendix C: AD SensorRail Control Utility Camera Control, SensorRail, and PC Functions Camera Control Functions Dome camera and rail functions Select Dome Camera. To select the camera dome, click 0-9 keys on the numeric keyp ad and then SET.
SENSORRAIL IIIE AD RL3TRK SERIES 8200-0593-02, REV. A INSTALLATION GUIDE 34 of 34 SensorRail Control Functions Trolley Left. Click to move the trolley left. Trolley Right. Click to move the trolley right. Outputs. Doubleclick 1 or 2, or click 3 or 4 to select the appropriate camera auxili ary port.
An important point after buying a device American Dynamics ADRL3TRK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dynamics ADRL3TRK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dynamics ADRL3TRK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dynamics ADRL3TRK you will learn all the available features of the product, as well as information on its operation. The information that you get American Dynamics ADRL3TRK will certainly help you make a decision on the purchase.
If you already are a holder of American Dynamics ADRL3TRK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dynamics ADRL3TRK.
However, one of the most important roles played by the user manual is to help in solving problems with American Dynamics ADRL3TRK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dynamics ADRL3TRK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
