Instruction/ maintenance manual of the product HWM88-0566T Haier
Go to page of 10
Please read this manual carefully before using. Retain it for future reference. Fully Automatic W ashing Machine This manual is for HWM88-0566T Special number:0030507833B User's manual.
Specification table the 2nd cover Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 9 Usage of th.
1 Meaning and description of the symbols Contents marked with that symbol are actions forbidden to perform. Performing of those action may result in damage of the machine or influence the personal safety of the users. Contents marked with that symbol are related to the safety of the product and the personal safety of the users.
2 Saf ety prec autions Earth The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc.
Disposal after washing Safety precautions Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. T ake special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not decompose, repair or alter the machine by yourself.
Attention: After switiching on the power,the function of the "Air dry" and "reserve"is not selected at the same time. Only after the program with the spin is set,"Air dry".
5 12 b The drainage shall be smooth with the drain hose. 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not step on or press the drain hose.
>10mm Connection between the water inlet hose jointer and the water faucet Wate r faucet,not suitable Install the wat er inlet hose It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth.
RESER VE PROCESS WA TER LEVE L SOAK WASH RINSE SPIN 1 2 3 4 RESERVE(HOURS LA TER) TIME REMAINED(MINUTES) Description of operation button a 5 Use the operation buttons "" Process button With it you can select one or several processes of soak, wash, rinse and spin.
If you open the top lid,the machine will stop working and alarm in spinning process. 4. Close the top lid The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
An important point after buying a device Haier HWM88-0566T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM88-0566T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM88-0566T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM88-0566T you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM88-0566T will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM88-0566T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM88-0566T.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM88-0566T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM88-0566T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
