Instruction/ maintenance manual of the product HWM75-0528 A Haier
Go to page of 10
Please read this manual carefully before using. Retain it for future reference. Fully Automatic W ashing Machine This manual is for HWM75-0528 A Special number: 837A User's manual.
Specification table the 2nd cover Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 8 Usage of th.
1 Packing list Names of the par ts Handle Drain hose frame Drain hose Water absorption cushion Water inlet valve Power cord Back cover Lint filter Filter frame Detergent box T op lid component Control.
2 Safety precautions Back Front The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc.
Disposal after washing Safety precautions After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
Back Front Soft items Screw Bottom plate The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal.
Program select 5 The drainage shall be smooth with the drain hose. 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not step on or press the drain hose.
"Power" button Push the "power" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "power" button to switch on the power. If the "start/pause" button is not pushed, the machine will switch off the power automatically after 5 minutes.
Connection between the water inlet hose and the washer 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
If y ou open the top lid,the m achine will s top working and alarm in spinning process. 4. Close the top lid The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time.
An important point after buying a device Haier HWM75-0528 A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM75-0528 A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM75-0528 A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM75-0528 A you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM75-0528 A will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM75-0528 A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM75-0528 A.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM75-0528 A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM75-0528 A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
