Instruction/ maintenance manual of the product HWM70-0588 Haier
Go to page of 10
User's manual This manual is for HWM70-0588 Environmental-friendly Double Drive Washing Machine Please read this manual carefully before using. Retain it for future reference.
Specification table the 2nd cover Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 6 Preparation before washing 8 Put in the laundries 9 Usage of th.
1 Packing list Meaning and description of the symbols Contents marked with that symbol are actions forbidden to perform. Performing of those action may result in damage of the machine or influence the personal safety of the users. Contents marked with that symbol are related to the safety of the product and the personal safety of the users.
2 Safety precautions Phenomena The reason How to settle T rouble-shooting answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair.
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat.
After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine, then lift the machine up gently . See to the figure: Please install and adjust the machine according to the requirement of the manual.
<10cm <1.5m 5 12 > 30mm b 1.Push "POWER" button to switch on the power 2.Push "PROGRAM"button to select suitable full-auto program After the power is switched on, "Normal" is automatically set.
Reserve, remain time digitron It displays "--" during detecting. It displays remained reserve time (hour). It displays total remained time (min). If the total time exceeds 99 minutes, it uses "A" on tens digit to represent100 minutes, and uses "b" to represent 1 10 minutes.
"START/PAUSE" button After the power is switched on, press it to start the machine During working, push it to pause. During pause, push this button to restart and go on working Connection between the water inlet hose and the washer 1. Do not take off the water absorption cushion.
The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the standard capacity. The largest capacity of this machine is 7.
An important point after buying a device Haier HWM70-0588 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM70-0588 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM70-0588 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM70-0588 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM70-0588 will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM70-0588, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM70-0588.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM70-0588. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM70-0588 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center