Instruction/ maintenance manual of the product HWM65TLF Haier
Go to page of 20
W ashing Machine HWM65TLF HEAVY NORMAL GENTLE QUICK SOAK WASH RINSE SPIN LARGE MEDIUM SMALL WARM COLD DELAY START PROCESS WATER LEVEL TEMP SELECT WASH C YCLE POWER ON OFF TIME REMAINING TIME ON HWM65T.
IMPOR T ANT SAFETY INSTRUCTIONS Warning - T o reduce the risk of fire, electric shock, or injury when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended purpose as described in this user and care guide.
2 13. Do not try to remove clothes while the tub is moving. L et it come to a complete stop. 14. The lid must be closed when bowl i s spinning. 15. Do not operate your a ppliance when parts are missing or broken. 16. Do not use this appliance for commercial clothes washing.
T able Of Contents 3 PAGE IMPORTANT SAFETY INSTRUCTIONS..................1 OPERATING INSTRUCTIONS.................................4 Parts and Features...................................................4 Operations......................................
OPERA TING INSTRUCTIONS Parts and Features 4 11 11 11 11 Lint Filter T op lid Detergent box Inner tub Hight Pulsator Control panel seat Adjustable foot two Back faceplate Control panel film Power swit.
Cold Water inlet valve Power cord Handle Back cover Hot Water inlet valve 4 1 2 3 5 6 5 1 2 3 5 6 4 Drain hose bushing.
Po wer Button:(1) Press the button i n to turn the power ON and press the button out to turn the power OFF . Button in=P ower On Button out=power Off Start/Pause Button:(2) Understanding the Control Panel Operations Delay Start Button:(3) This convenient feature lets you delay the start of the wash cycle between 2 to 24 hours.
Quick Cycle Quick washing of the light dirt laundries only 29 minutes Gentle Cycle Wa shing the woollen textile or underwear TEMP SELECT Button:(7) Operating Procedure 7 SOAK WASH RINSE SPIN PROCESS LARGE MEDIUM SMALL WATE R LEVEL WARM COLD TEMP SELECT HOT PROCESS Button:(5) This is to select washing process.
4. Water Level Selection After Cycle selection press the Water Lever button to select the proper Water Lever for wash. Note: See chart below for Load Size selection. The Capacity of Water Level Water Quantity Washing (kg.) 3.5~6.5 Large About 76L 2.0~3.
Fabric Softener Dispenser: The fabric softener dispenser is located on the top of the agitator. Dispenser will automatically release liquid fabric softener at proper time during rinse cycle. Steps to use the dispenser: 1.Pour in liquid fabric softener into dispenser as recommended by the manufacturer.
Bleach Dispenser 10 Bleach Dispenser: Bleach dispenser is located on front corner under the loading door. Pour in recommended amount of bleach into dispenser during the first wash fill. Note: Use only liquid bleach in dispenser . Warning: Be careful not to spill undiluted bleach on the washer cabinet or your clothes.
Lint Filter The lint filter must be used during washing. It must be cleaned in time after each using. 1.T ake off the lint filter. Pull up the lint filter from the agitator. 2.Remove lint Press the lint screen clip with your thumb and index finger, and get the screen down ward as shown in figure below.
CARE A ND CLEANING GUIDE 12 Cleaning and Maintenance Use only damp or sudsy cloth for cleaning control panel. T o avoid any kind of damage to cabinet finish, wipe washer cabinet as needed. If you spill liquid/powdered softener bleach or detergent on the cabinet, wipe cabinet immediately because it can damage the finish.
13 Moving & Vacationing Turn off water supply faucet's and disconnect hoses. Drain water from all hoses.This will prevent from damaging due to water leakage if the hoses accidentally get ruptured or they become loose. Disconnect electrical plug.
TROUBLESHOOTING 14 Washer does not operate: Check if unit is plugged in. The plug may have come loose. Check if the electrical wall receptacle is of proper voltage.
15 Washer is making noise: Washer may need to be reinstalled. (Check washer installation section) Washer load may need to be re-balanced, as the load may be uneven. Coins, loose change, buttons or other heavy objects could make noise(read Operating Guide-Normal Operating Sounds).
Unpacking Y our Washer • • Remove all packing materials. This Includes the foam base and all adhesive tape holding the washer accessories inside and outside Open the top lid to remove the styrofoam drum brace.
17 Leveling Y our Washer Your washer has 2 leveling legs; which are located on the bottom corners. After properly placing your washer in its final position, you canlevel your washer. Leveling legs can be adjusted by turning them counter clockwise to raise your washer or turning them clockwise to lower your washer.
5.Plug in the washer t o a regular 2 30-240Vo lt/50Hz,10Amps outlet. Note :Carefully inspect a ll a round the machine and at the back for any leaks, an d ti ghten any loose connections. 18 Caution: If after completing these steps, you are unsure that unit is properly installed, contact a qualified installer .
Note: Where a standard two-prong outlet is encountered, it is the personal responsibility and obligation of the consumer to have it replaced with a properly grounded three-prong outlet. Extension Cords: We do not recommend that you use an extension cord.
An important point after buying a device Haier HWM65TLF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM65TLF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM65TLF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM65TLF you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM65TLF will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM65TLF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM65TLF.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM65TLF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM65TLF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
