Instruction/ maintenance manual of the product HWM62-0566 Haier
Go to page of 18
User's manual This manual is for HWM62-0566 Please read this manual carefully before using. Retain it for future reference. Fully automatic washing machine.
Contents Names of the parts Safety precautions T rouble shooting Packing list Specification Installation and adjustment Usage of the drain hose Preparation before washing Put in the laundries Usage of.
1 Please check if the power receptacle has good earthing condition before using to guarantee your safety . W arning sign Names of the parts Meaning and description of the symbols Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users.
2 Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.
3 Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine.
4 Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine.
5 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not trample or press the drain hose. 3. If the drain hose is too long, cut it at mid point.
6 The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth.
7 Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1.
8 1 Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.
9 2 Put in the laundries The capacity of washing and spinning of he machine refer to the largest weight ofthe standard laundries under dry conditionthat can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity.
10 4 Close the top lid Except draining, if the top cover is opened, the washing machine will stop running and alarm. Description of the function of buttons 5 Use the operation buttons Page 15 Mode and.
11 Quick Quick and high-efficiency wash for common laundries Jeans Fibre Cotton Standard Tub dry Posthaste Program button Following automatic programs are available for selection Program Common During common and standard programs, the washing machine can detect the laundries automatically .
12 b Steps of using the operation buttons and description of each step. Page 1 1 WA SH SOAK RINSE SPIN FLASH LIGHT FLASH LIGHT ST ANDARD COMMON FUZZY POSTHASTE QUICK JEANS FIBRE COTTON TUB DRY ST ART/.
13 Page 10 WATER LEVEL water pressure and water level influence the wash time. Push the SELECT button for 6 times, and it will resume the initial mode.
14 Figure 1 7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may I nfluence your using the machine. Please first pull off the power plug from the receptacle before cleaning.
15 Common phenomena Phenomena Explanation The wash procedure is paused The digitron displays E0. The safety switch acts, and the spin- ning cannot work. Amend twice automatically ,The digitron displays E3. The water filling does not work, or is slow. The digital displays E4.
16 Packing list User's manual One piece Name T apping screws Quantity Bottom plate One piece The end connecting to the washing machine Jointer connecting the water inlet hose to the water faucet .
An important point after buying a device Haier HWM62-0566 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM62-0566 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM62-0566 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM62-0566 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM62-0566 will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM62-0566, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM62-0566.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM62-0566. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM62-0566 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
