Instruction/ maintenance manual of the product HWM60-111S Haier
Go to page of 18
T win-tub Washing Machine User's manual This manual is for HWM60-11 1S Please read this manual carefully before using. Retain it for future reference.
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names.
1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user .
2 Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.
3 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself.
Overflow filter Lint filter If the extra hose is too long, cut it either at point A or B. <10cm B A > 30mm <1.5m 4 Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
5 How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. T ake off the drain hose from the cabinet.
6 Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose .
7 The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. .
8 Washing sequence OFF OFF DRAIN STRONG Figure 1 Figure 2 Figure 3 Figure 4 WOOL WOOL WOOL SPIN TIMER WASH TIMER WASH TIMER WASH SELECTOR LINEN LINEN Wash SILK SILK SILK COTTON COTTON DRAIN STRONG WASH SELECTOR WASH SELECTOR 1. Fill the water and add the dissolved washing powder to make the water level reach the preset position.
9 Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland 1. Put the laundries into the spin tub evenly and smoothly. 2. Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small.
10 Rinse with stored water Rinse with water-filling 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Ad just the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.
11 Selection of the spin time list 3 Laundries Spin time (minutes) About 4~5 Bed sheet or blanket About 2~4 Underwear (knitwear) Swear (chemical fiber) About 1~2 Within 1 minute Blending thin laundries 1. Put the laundries into the spin tub evenly and smoothly.
12 After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 T ake off the overflow filter.
13 Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1).
14 T ro uble-shooting Ans wer to question When the remained water is frozen If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique upwards to dismantle it.
15 T r ouble-shooting Ans wers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes.
16 W ater inlet hose Water-filling jointer Gland Lint filter Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One piece One piece One set W ater lev.
An important point after buying a device Haier HWM60-111S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM60-111S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM60-111S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM60-111S you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM60-111S will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM60-111S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM60-111S.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM60-111S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM60-111S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
