Instruction/ maintenance manual of the product HWM130-0523S Haier
Go to page of 18
T win-tub Washing Machine User's manual Model: HWM130-0523S Please read this manual carefully before using. Retain it for future reference..
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names.
Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user .
Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.
Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself.
Put the underside of the lint filter into overflow filte r then push the upside into overflow filter After installation, please refer that the lin t filter installed to the right station, otherwise the lint filter may be fallen off when washing, influencing your use.
How to change the direction of the drain hoses Install the water inlet hose; Select the water level Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Figure 1 indicates the ex factory installation position of the drain hose.
Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose .
Ï´µÓ¼ÁµÄʹÓà The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
Washing sequence Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Spin timer SPIN WASH Wash timer WASH TIMER Wash selector Buzzer Water-filling entrance (To set to below 2 minutes, first set to 5 minutes then turn it back. it can increase the service life of the timer).
1 2 Set the inlet selector handle on spin side and fill water for about 1 min. Close the spin tub outer cover and spin for about 1 - 2 min. In case water flows out from wash tub side due to too much inflow , please turn down the water tap a bit.
Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is few, please use "ST ANDARD" current.
1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries.
Page 4 After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the overflow filter The lint filter must be used during washing.
Ï´ºó´¦Àí Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1).
When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt.
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
W ater inlet hose Gland Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One set Specification W ater level W ater quantity about (L) Maximum/99 Medium/77 Minimum/65 Injection pressure(MPa) 0.02~0.2 16 10.
An important point after buying a device Haier HWM130-0523S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HWM130-0523S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HWM130-0523S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HWM130-0523S you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HWM130-0523S will certainly help you make a decision on the purchase.
If you already are a holder of Haier HWM130-0523S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HWM130-0523S.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HWM130-0523S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HWM130-0523S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
