Instruction/ maintenance manual of the product HW80-187S Haier
Go to page of 16
T win-tub Washing Machine User's manual T win-tub Washing Machine User's manual This manual is for Please read this manual carefully before using.
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Names of the parts The cover 2 Pa.
¸÷²¿Î»Ãû³Æ 1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user .
×¢ÒâÊÂÏî 2 Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.
×¢ÒâÊÂÏî 3 Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall not use the machine.
Overflow filter Lint filter If the extra hose is too long, cut it either at point A or B. <10cm B A > 30mm <1.5m 4 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Install the water inlet hose; Select the water level Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Insert the water inlet hose into the water-filling entrance on the control panel directly.
Ï´Ç°×¼±¸ Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.
Ï´µÓÎïµÄ²Î¿¼ÖØÁ¿ Ï´µÓÐëÖª Ï´µÓ¼ÁµÄʹÓà The capacity of washing and spinning of the machine refer to the weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the standard capacity.
Âé Spin timer Wash timer Wash selector Water-filling entrance (T o set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). (Strong current, standard current) (to set to below 1 minute, first set to 2 minute then turn it back.
Rinse with water-filling Rinsing 1.Put the laundries Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity.
Rinse with stored water 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is few, please use "Standard" current.
Ï´ºó´¦Àí After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. T ake off the overflow filter.
Ï´ºó´¦Àí Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water.
2.in stall th e after cle aning, ins tall it a s or igin as sure it r eliable protective co ver Ï´ ºó ´¦ Àí Cleaning the protective cover 1.cl eaning di rty under th e take o ut th e su ndries us ing the pl ier o r ot her wi ry protective co ver Wipe the complete unit with soft cloth twisted dry.
T rouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
An important point after buying a device Haier HW80-187S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HW80-187S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HW80-187S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HW80-187S you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HW80-187S will certainly help you make a decision on the purchase.
If you already are a holder of Haier HW80-187S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HW80-187S.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HW80-187S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HW80-187S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
