Instruction/ maintenance manual of the product AD1684B American Dynamics
Go to page of 28
Model AD1684B Receiver Dual Channel General Purpose Receiver Installation Instructions This manual describes the installation and operating procedures for the AD1684B Dual Channel Receiver. The Receiver provides for the control of a Pan/Tilt drive and a motorized Lens for two separate cameras.
This software/firmware is confidential to and is copyrighted by SENSORMATIC ELECTRONICS CORPORATION. It is not to be copied or disclosed in any manner without the express written consent of SENSORMATIC. The software is furnished to the purchaser under a license for use on a single system.
The installation of this product should be made by qualified service personnel and should conform to all local codes. QA301D ! W W W W A A A A R R R R N N N N II I I N N N N G G G G To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
.
CONTENTS Page DESCRIPTION............................................................................... 1 FEA TURES ..................................................................................... 1 Pan/T ilt and Lens Control ...................
.
AD1684B DESCRIPTION DESCRIPTION The AD1684B Receiver is used with American Dynamics Matrix Switching Systems to control pan, tilt, zoom, focus, iris, and auxiliary functions at a camera site. This Receiver is classified as a dual channel type, since two independent control channels are supplied.
SETUP AD1684B SETUP Receiver Configuration Setup AD1684B Receivers may be configured as a two-channel Pan/Tilt and Lens control unit or a single channel unit with four auxiliaries. A two-position Berg jumper, labeled J5 (see Figure 1), is provided to establish this configuration.
Camera Number Setting There are two DIP switches which associate the camera number with the respective channel, A or B. DIP switch S1 is for Pan/Tilt and lens control of Channel A, and DIP switch S2 is for Pan/Tilt and lens or auxiliary control of Channel B.
SETUP AD1684B 4 Table 4 - S2 Pan/Tilt and Lens Camera Number Switch Settings or Auxiliary Settings Channel B L = left ("off"); R = right ("on") CAMERA SWITCH CAMERA SWITCH NUMBER 1.
AD1684B INSTALLATION INSTALLATION This installation should be made by qualified service personnel and should conform to all local codes. Safeguards must be taken to avoid unintentional operation by employees and maintenance personnel working about the premises, by falling objects, by customers, by building vibration, and by similar causes.
CONNECTIONS AD1684B CONNECTIONS Code Line Connections The Code Line connection to the Receiver is made with user- supplied, shielded 2-wire twisted pair, Belden 8760 or equivalent (for Plenum use Belden 88760 or equivalent). The maximum code line length is 5000 feet.
AD1684B CONNECTIONS Pan/Tilt and Lens Connections The Receiver connection to a Pan/Tilt and a motorized Lens is with a 10-pin connector. This connector is located on the left side of the PCB and is labeled J7 (see Figure 1, page 2).
CONNECTIONS AD1684B Table 5 - Dual Pan/Tilt and Lens 10-pin Connector Pinout Channel A - J7 PIN No. FUNCTION Pan/Tilt PINOUT LENS PINOUT 01 Focus __________________ __________________ 02 Zoom ________.
AD1684B CONNECTIONS Auxiliary Connections The Receiver connection of auxiliary equipment is with a ten (10) pin connector, labeled J6, located on the right side of the PCB (see Figure 1, page 2).
CONNECTIONS AD1684B Pre-position (Preset) Connections The Receiver connection to a Pan/Tilt or Lens unit with pre- position servos is with a ten (10) pin connector labeled J4 (see Figure 1, page 2). For dual-channel operation a second 10-pin connector labeled J3 is used for channel B.
AD1684B CONNECTIONS Table 7 - Pre-position Pan/Tilt and Lens 10-pin Connector Pinout Channel A - J4 PIN No. FUNCTION Pan/Tilt Servo PINOUT Lens Servo PINOUT 01 + REF __________________ _______________.
CONNECTIONS AD1684B Power Input Connections Refer to the instructions provided with the enclosure for suitable conduit connectors (when required), and mounting and caution information. Two PG-16 liquid-tight bushings are supplied for use with cord diameters from .
TYPICAL SYSTEM CONNECTIONS.
.
TYPICAL SYSTEM CONNECTIONS AD2150 Controller to AD1684B MAXIMUM DISTANCE between AD1684B and AD2150 is 5000 Ft, using shielded, 18 AWG cable AD2150 AD1684B BWS RS232 PORTS 123 KEYBOARDS 2345 CAMERAS A.
TYPICAL SYSTEM CONNECTIONS AD1996 Controller to AD2091 Code Generator, to AD1684B AD1684B AD2091 AD1996 ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF B W S B W S B W S B W S B W S B W S B W .
TYPICAL SYSTEM CONNECTIONS AD1684B to AD1240P Pan/Tilt with Pre-position AD1684B 13-Pin Connector 1240P PAN/TILT 123456789 1 0 1 1 1 2 1 3 BLACK WHITE SHIELD FOCUS ZOOM IRIS DC GROUND AC COMMON DOWN UP DC GROUND RIGHT LEFT + REF PAN TILT FOCUS ZOOM - REF SHIELD SHIELD N.
.
INDEX.
.
Auxiliaries Configuration Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
An American Dynamics Product Designed and built by Sensormatic CCTV Systems Division One Blue Hill Plaza Pearl River, New York, 10965 Business: (914) 624-7600 Technical Support Center: 1-800-442-2225 .
An important point after buying a device American Dynamics AD1684B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dynamics AD1684B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dynamics AD1684B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dynamics AD1684B you will learn all the available features of the product, as well as information on its operation. The information that you get American Dynamics AD1684B will certainly help you make a decision on the purchase.
If you already are a holder of American Dynamics AD1684B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dynamics AD1684B.
However, one of the most important roles played by the user manual is to help in solving problems with American Dynamics AD1684B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dynamics AD1684B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
