Instruction/ maintenance manual of the product HDE-2580EGB Haier
Go to page of 16
Please read this booklet carefully before fixing and using and save it for future reference. HDE-2580EGB.
1 OPERA TION THEOR Y OF MICROW A VE OVEN 1. Microwave is a kind of high frequency electromagnetic wave, which is commonly distributed in the nature. But the existing form of microwave is dispersed so that it cannot be coll ected together for heating purpose.
2 Fig.2 c)Place microwave oven into cabinet,then fix it with wood screws,as shown in Fig.3. Cabinet details: Cavity: (L)560mm*(H)360mm *(D)550mm; Intake: (L) ≥ 272mm*(W) ≥ 72mm Exhaust Port: (L) ≥ 272mm*(W) ≥ 72mm .
3 d)Secure ornamental frame to holders,as shown in Fig.4. The side with gap should be installed at the bottom of MWO. Ornament Frame Fig.4 e)Final assembly as shown in Fig.
4 Net Depth ≥550mm I n t a ke F i g . 6 UTENSILS GUIDELINE It is strongly recommended to use the containers which are suitable and safe for microwave cooking. Generally speaking, the containers which are made of heat-resistant ceramic, glass or plastic are suitable for microwave cooking.
5 IMPOR T ANT SAFEGUARDS The following basic precautions should always be followed when using el ectrical appliance: 1. Read all instructions before using. 2. Make sure the voltage in your living area corresponding to the one shown on the rating label of the appliance.
6 15. This appliance is not intended for use by young children or infi rm persons without supervision. Only allow children to use the oven without supervision when adequate instructions have been given so that the child is able to use the oven in a safe way and understands the hazards of improper use.
7 OPERA TION OF CONTROL P ANEL 1. Before cooking The LED flashes 3 times when plugged in power supply . Then it flashes , prompting you to input the cooking menu and time. 2. T ime.W eight/Auto Cooking knob Y ou can select auto cooking menu, increase or decrease cooking time and weight during operation by turning Time.
8 At the initial or input stage: press Pause/Cancel button once to cancel input programs and resume initial stage. During cooking: press Pause/Cancel button once to stop oven operation while twice to cancel cooking programs. 4. Clock setting(24 hours) Preset.
9 4) If you turn the food during operation, press the Instant/S tart button once and the preset cooking procedure will continue. 5) If you intend to remove the food before the preset time, you must press Pause/Cancel button once to clear the preset procedure to avoid unintended operation of next time use.
1 0 1 1. Auto Defrost Press Auto Defrost button, LED cycles to show D.1—D.2—D.3 D.1 ---applicable for defrosting poultry ranged from 0.2 to 3.0Kg. D.2 ---applicable for defrosting meat ranged from 0.1 to 2.0 kg. D.3 --- applicable for defrosting seafood ranged from 0.
1 1 defrosted portions. - Press Instant/S tart button to continue defrosting. - After defrost time, stand covered w ith aluminium foil for 5-30 minutes. 12. Auto Cooking The oven has default cooking menu for simple operation.When LED flashes colon turn T ime.
1 2 Note: 1. The cook time above is based on the food which of the room temperature is 20-25 ℃ . Results will vary from the food in dif ferent temperature.
1 3 MICROW A VE COOKING TIP 1) Arranging food Place thicker areas toward outside of dish and the thi nner meat in the center and spread them evenly . Do not overlap if possible. 2) Cooking time S tart cooking with the shorter per iod of time and ex tend it according to the actual need.
1 4 Suggest you perform below steps after every time use. Never use hard deter gent, gasoline, abrasi ve powder or m etal brush to clean any part of the appliance. Clean the oven at reg ular intervals Disconnect th e power supply cord befor e cleaning.
1 5 Below listed condition may cause undue microwave exposure during servicing. 1. Unproper fitting of magnetron. 2. Unproper matching of Door interlock, door hinge and door . 3. Unproper fitting of switch support. 4. Door , Door seal or enclosure has been damage.
An important point after buying a device Haier HDE-2580EGB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HDE-2580EGB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HDE-2580EGB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HDE-2580EGB you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HDE-2580EGB will certainly help you make a decision on the purchase.
If you already are a holder of Haier HDE-2580EGB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HDE-2580EGB.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HDE-2580EGB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HDE-2580EGB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
