Instruction/ maintenance manual of the product HBS82-880 Haier
Go to page of 17
HBS82-880 A utomatic Drum W ashing Machine Operation Manual Ta b le of Contents Before using Names of Parts--------------inside front cover Matters Needing Attention--------------------1-3 Installatio.
Names of Parts Detergent distributor To p program knob Operation button Door Porthole Drainage hose clip Back plate Earth terminal Power supply cable Back plate screw (3) Packing bolt (3) T emperature.
1 Matter s Needing Attention 1. A separate earthed socket is required f or the power supply . After installation of the washing machine,the power plug should be accessible during the normal wash.
2 Matter s Needing Attention 9. The washing machine should be place in a well ventilated area maintaing a space between walls or furniture. 10. Keep away from heat sources and direct sunlight to prevent plastic and rubber com- ponents from aging.
3 Matter s Needing Attention 9. Keep the door slightly open when the washing machine is not being used. Never cover the machine with a plastic sheet. 4.
Installation 4 Fig 1 As shown in figure1 remov e all the packing materials (including the foam base). Remove the packing screws as shown in figure 2. The packing bolts protect the appliance from shock during transpor tation The steps below should be f ollowed bef ore using the appliance, 1.
5 Installation Connection of water inlet hose and washing machine 1. Place the water inlet hose nut on the connector of the water inlet valve. 2. slightly shake the water inlet hose nut to see if it is tightly and properly fixed.
6 Control Panel A W ashing program Tu rn the knob cloc kwise to set the desired wash program . Caution: T urn off the power and turn the program knob clockwise for setting desired wash program. B W ashing temperature Tu rn the knob clockwise to set the desired temper ature.
7 Operational Functions G Power light The light will illuminates when the power supply is connected. F Power button Press the button ,washing machine will working;release the button, the washing machine will stop. ON OFF ON OFF 7 E Economic wash button Pressing this button will reduce the consumption of water during bleaching under intense wash.
8 Program Selection NOTE: “o”means softener liquid detergent canbe added when necessary. “ ”means detergent can be added when necessary. “ ”means no detergent can be added.
9 1. Power supply Plug in the power supply 220V~/50Hz. 3. Laundry treament 2. Water supply Tu rn on the tap ensure that the water is clear . Caution: Before staring the washing machine turn on the water faucrt to ensure that the water faucet and the water inlet hose are connected correctly and do not leak.
W ashing Methods 10 1. Laundry loading Evenly load the laundry in the washing machine and then tightly close the door of the washing machine Note: 1) When first using the washing ma- chine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing ma- chine.
11 W ashing Methods 7. End W ait 2-3 minutes after the washing process is finished, press the power b utton again to cut off the power supply . Open the door to take out the laundr y .
12 Maintenance 6. If the machine is to be moved a distance location, replace the vibration mounting locks which were re- moved during installation as shown below. 1. T urn of the water and electricity supply after every wash. Open the door to pre- vent the formation of moisture and odors.
13 Tr ouble shooting The following circumstances do not constitute problems. Do not contact the main- tenance service until the problem has been confirmed.
14 Te c hnical Specification Model Item Power supply HBS82-880 220V~/50Hz Maximum working current (A) W ater pressure (MP a) W ashing power (W) Spinning power (W) 0.
I1: Power Switch EV C ,EVP ,EVL: W ater valv e I2: Economic wash Switch P1,P2: Pressure Switch I3: No spin Switch THR: Adjustable Ther mastat MR: Door Lock D: Drain Pump TM: Timer motor MC,ML: Motor H.
An important point after buying a device Haier HBS82-880 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HBS82-880 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HBS82-880 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HBS82-880 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HBS82-880 will certainly help you make a decision on the purchase.
If you already are a holder of Haier HBS82-880, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HBS82-880.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HBS82-880. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HBS82-880 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
