Instruction/ maintenance manual of the product FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) Haier
Go to page of 6
Haier Household Electric W ater Heater User ' s Manual Please read this manual before usage Retain it for future reference Qingdao Economic and T echnological Development District Haier Water Heater Co.
Mark of Haier Safe Water Heaters Contents See to the physical product for the appearance,color or pattern. Friendly Hints If water supply cutoff occurs in your home, please disconnect the power.
Rated voltage: 220V ~, 50Hz Dimensions: (see toFig. 1) Power: 1500 W Weight: (see to Fig. 1) Rated pressure: 0.75 Mpa Volume :(see to Fig. 1) Waterproof grade: Antisplash ( ) T ap water pressure: not less than 0.05 MPa Dear User, Thanks for choosing Haier water heater product.
For the first use after installation, due to there's no water within the tank, first the city water inlet valve and mixing valve must be opened. Close the mixing valve when water flows out continuously from the showerhead or other outlets (the tank is full).
Connection and Use of Safety V alve: After switching on the water heater , a little water will drip from the safety valve pressure relief vent due to normal expansion. The vent shall always keep open to the air. Avoid being blocked. Connect one end of the hose to the safety valve vent and the other end to the sewage drain.
Do not install it outdoors. Do not install it as stand-alone. It shall be hung on firm and solid wall. Do not install it in places unable to drain water. Symbol Denotation Do not proceed!Wrong operation may cause fatal injury or death. Do follow the instructions!Wrong operation may cause human injury or house property loss.
An important point after buying a device Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) you will learn all the available features of the product, as well as information on its operation. The information that you get Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) will certainly help you make a decision on the purchase.
If you already are a holder of Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E).
However, one of the most important roles played by the user manual is to help in solving problems with Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III(E) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
