Instruction/ maintenance manual of the product DW12-BFE ME Haier
Go to page of 12
Domestic Dishwasher DW12-BFE ME Code:0120503412 GB.
.1. Close-up View (control panel) A B C D E F ON-OFF Light ON-OFF Button Low Salt Indicator Light Low Rinse Aid Indicator Light G H I J K L Cycle select button Half-load indicator light Handle For Ope.
.2. Close-up View (Interrior) A B C D Upper Rack Rack Height Adjustor Top Spray Arm Lower Rack E F G H I Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser Third Sprayer Technical characteristics Width 60cm Depth 60cm Height 85cm Capacity 12 standard place settings Mains water pressure 0.
Salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher,deposits will form on the dishes utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
.4. GB Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used.The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table".
.5. GB Loading the Dishwasher Before placing the dishes in the dishwasher, remove the large food particle to prevent the filter from becoming clogged,which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed.
.6. GB Turning on the Appliance Starting a wash cycle After having completed all of the installation steps in the pre- ceding paragraphs, turn on the water all the way and press the ON-OFF button (A) located on the control pannel. The "B" indi- cator light will come on.
.7. GB - It is important to try and run the dishwasher when it is fully loaded to save on enery.In order to prevent odours from forming and food from caking onto the dishes,you can run the soak cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Pre-wash: 5g Extended wash: 25g Wash Cycle Table Cycle Cycle Selection Information Description of Cycle Detergent Rinse Aid Normal wash (IEC-EN50242) Intensive Wash Rapid Wash Soak Normally dirty dishes,pots and pans without dried-on residue Very dirty dishes,pots and pans.
.9. GB Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
.10. GB Installation Positioning the Appliance Position the appliance in the desired location.The back should rest against the wall behind it,and the sides,along the adjacent cabinets or wall.The dishwasher is equipped with water supply and drain hoses that can be positioned on the right or the left to facilitate proper installation.
Installation The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
An important point after buying a device Haier DW12-BFE ME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier DW12-BFE ME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier DW12-BFE ME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier DW12-BFE ME you will learn all the available features of the product, as well as information on its operation. The information that you get Haier DW12-BFE ME will certainly help you make a decision on the purchase.
If you already are a holder of Haier DW12-BFE ME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier DW12-BFE ME.
However, one of the most important roles played by the user manual is to help in solving problems with Haier DW12-BFE ME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier DW12-BFE ME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
