Instruction/ maintenance manual of the product Electric Powerhead Electroglide H-P Products
Go to page of 16
ELECTROGLIDE ™ ELECTRIC POWERHEAD OWNER’S MANUAL Review this manual before operating your Electroglide Electric Powerhead.
TABLE OF CONTENTS Subject Page Safety Instructions 3 Parts and Features 4 Assembling Vacuum System 5 General Operation 6 Electroglide Attachments Handle Attachments 6 Wand Assembly Attachments 6 Perfo.
WARNING To reduce the risk of fire, electrical shock or injury: ELECTROGLIDE 3 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this vacuum system.
4 ELECTROGLIDE It is important to know your Electroglide parts and features to assure its proper and safe use. Review these before using your Electroglide. WARNING Always unplug the Electroglide before cleaning the brush area as brush may suddenly restart.
ELECTROGLIDE 5 Before assembling your Electroglide Electric Powerhead, be sure you have all parts shown in PARTS AND FEATURES. 1. Connect the upper and lower wand sections. (The wand swivel is located on the lower wand.) 2. Slide the upper and lower wands together until the wand button snaps into place.
6 ELECTROGLIDE GENERAL OPERATION Hose Handle Attachments If the Electroglide is attached, turn cleaner OFF before removing hose handle from wands. 1. Press lock button, then pull to remove handle from wand. 2. Slide attachments firmly on handle as needed.
Handle Release Pedal ELECTROGLIDE 7 Edge Cleaner Active brush edge cleaners are on both sides of the Electroglide. Therefore, guide either side of the Electroglide along baseboards or next to furniture to help remove dirt trapped at carpet edges.
Light Bulb Replacemnent 1. Disconnect cleaner from electrical outlet. 2. Remove light cover by pressing in and lifting both sides of cover as shown. WARNING Always unplug electrical cord and vacuum hose before servicing and maintaining the Electroglide Electric Powerhead.
Base Brush Support Tab ELECTROGLIDE 9 MAINTENANCE AND CARE To r emov e belt: 1. Remove light cover and light bulb as shown on Page 8. 2. Unscrew the Electroglide Powerhead cover screws. Belt Removal and Replacement The belt should also be checked periodically to be sure it is in good condition.
10 ELECTROGLIDE Belt Removal (continued) 6. Remove worn belt. 7. Slide brush supports off to check and clean brush support areas. MAINTENANCE AND CARE To replace belt: 1. Slide washers and brush supports onto brush assembly. 2. Install new belt over motor drive, then over brush sprocket.
ELECTROGLIDE 11 MAINTENANCE AND CARE Belt Replacement (continued) 5. Tilt cover to back. Press cover firmly until side tabs snap into place. Replace cover screws, light bulb and light cover. Brush Replacement 1. Remove the Electroglide Powerhead cover, belt and brush assembly.
12 ELECTROGLIDE ELECTROGLIDE REPLACEMENT PARTS.
ELECTROGLIDE 13 ELECTROGLIDE REPLACEMENT PARTS Illus. No. 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. 7922 7923 7972 7925 7926 7927 7967 7965 7929 7930 7931 7932 7933 7.
14 ELECTROGLIDE LIMITED W ARRANTY H-P PR ODUCTS, INC. warrants that the Electroglide Electric Po werhead, when used for household purposes, pursuant to Seller’s instructions, will be free from defects in materials and workmanship for a period of one year from the date of the initial consumer purchase.
ELECTROGLIDE 15 H-P PRODUCTS, INC. 512 W. GORGAS STREET LOUISVILLE, OHIO 44641 SERVICE INFORMATION The instructions in this booklet serve as a guide to routine maintenance. If additional service or repairs are required, please call 1-800-822-8356 for your nearest authorized service dealer.
H-P Products, Inc. 512 W. Gorgas Street Louisville, Ohio 44641-0912 HVS-968 -NL 0 2 /0 2 ®.
An important point after buying a device H-P Products Electric Powerhead Electroglide (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought H-P Products Electric Powerhead Electroglide yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data H-P Products Electric Powerhead Electroglide - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, H-P Products Electric Powerhead Electroglide you will learn all the available features of the product, as well as information on its operation. The information that you get H-P Products Electric Powerhead Electroglide will certainly help you make a decision on the purchase.
If you already are a holder of H-P Products Electric Powerhead Electroglide, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime H-P Products Electric Powerhead Electroglide.
However, one of the most important roles played by the user manual is to help in solving problems with H-P Products Electric Powerhead Electroglide. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device H-P Products Electric Powerhead Electroglide along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
