Instruction/ maintenance manual of the product WATER HEATING GSW
Go to page of 7
W ARNING: If the information in these instructions is not followed exactly , a fire or explosion may result causing property damage, per- sonal injury or death. W ARNING: Improper inst allation, adjustment, alter- ation, service, or maintenance can cause injury or property damage.
- 2 - I) INTR ODUCTION Thank you for purchasing this storage booster t ank . Properly inst alled and maint ained, it will provide years of trouble free service. The warranty on this storage booster t ank is in ef fect only when the t ank is inst alled and operated in accordance with these instructions.
- 3 - tenance and service must be provided. W ater lines and the storage t ank should be protected from freezing tempera- tures. Do not inst all the storage t ank in out door unprotected areas. It is desirable to have a floor drain nearby to permit easy draining if necessary .
- 4 - tem, check valves must be inst alled to prevent the circulator from pumping hot water into another t ank and overheating it. 8. The use of a pressure regulator is optional, but recom- mended when the cold supply pressure is over 80 p si.
- 5 - IV) OPERA TION 1. Follow boiler or heat source inst allation and operating instructions. 2. Fill the t ank (see “FILLING” section). 3. The boiler or water heating source should be set to pro- vide at least 1 1°C (20°F) higher water temperature than the temperature setting of the storage t ank 4.
- 6 - Anode Maintenance 1. T urn "OFF" the electrical supply to the t ank. 2. Close the cold water supply valve. 3. Open a nearby hot water faucet served by the system to depressurize the system. 4. Connect a hose to the drain valve and drain 22 litres (6 gal.
See Rating Label Serial Number prefix for W arranty Code. Reduced warranty period applies to Newfoundland. W arranty Code: P R S T U V W Y S tandard W arranty Y ears: 3 5 6 7 8 9 10 12 Reduced W arran.
An important point after buying a device GSW WATER HEATING (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GSW WATER HEATING yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GSW WATER HEATING - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GSW WATER HEATING you will learn all the available features of the product, as well as information on its operation. The information that you get GSW WATER HEATING will certainly help you make a decision on the purchase.
If you already are a holder of GSW WATER HEATING, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GSW WATER HEATING.
However, one of the most important roles played by the user manual is to help in solving problems with GSW WATER HEATING. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GSW WATER HEATING along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
