Instruction/ maintenance manual of the product G9910 Grizzly
Go to page of 10
HOOK & LOOP SANDER/POLISHER MODEL G9910 INSTRUCTION MANUAL COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
G9910 Hook & Loop Sander/Polisher -2 -.
G9910 Hook & Loop Sander/Polisher -1 - SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
G9910 Hook & Loop Sander/Polisher -2 - 9. USE PROPER EXTENSION CORD for the tool. Make sure your exten- sion cord is in good condition. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
G9910 Hook & Loop Sander/Polisher -3 - INTRODUCTION Commentary We are proud to offer the Grizzly Model G9910 Hook & Loop Sander/Polisher. The Model G9910 is part of a growing Grizzly family of fine power tools.
OPERATION INSTRUCTIONS Getting Started After making sure the power source matches the specifications on the sander label, plug in sander. Pull the trigger switch to turn it on, and release the switch to turn the sander off.
G9910 Hook & Loop Sander/Polisher -5 - MAINTENANCE General Regular periodic maintenance on your Model G9910 Hook & Loop Sander/Polisher will ensure its optimum performance. Make a habit of inspecting your sander each time you use it. Check for the following conditions and repair or replace when necessary: 1.
G9910 Hook & Loop Sander/Polisher -6 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street______________________________.
An important point after buying a device Grizzly G9910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G9910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G9910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G9910 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G9910 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G9910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G9910.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G9910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G9910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
