Instruction/ maintenance manual of the product G5049Z Grizzly
Go to page of 26
COMBINATION SANDER MODEL G5049Z INSTRUCTION MANUAL COPYRIGHT © 1997 BY GRIZZLY INDUSTRIAL WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
-2 - G5049Z Combination Sander WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
G5049Z Combination Sander -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY RULES FOR ALL TOOLS ...........................................
-2- G5049Z Combination Sander WARNING: For Your Own Safety Read Instruction Manual Before Operating Sander Safety Instructions For Power Tools These safety rules cannot cover every situation in a work shop. Consider your conditions when setting up or operating your sander.
G5049Z Combination Sander -3- Additional Safety Instructions For Sanders 17. USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommend- ed accessories. The use of improper acces- sories may cause risk of injury to persons. 18. CHECK DAMAGED PARTS.
-4- G5049Z Combination Sander Figure 1. Grounded Outlet Box Current Carrying Prongs Grounding Blade Is Longest Of the Three Blades Under no circumstances should the grounding pin from any three-pronged plug be removed. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.
G5049Z Combination Sander -5- We are proud to bring you the Model G5049Z Combination Sander. The Model G5049Z is part of a growing Grizzly family of fine woodworking machinery.
-6- G5049Z Combination Sander Contents of the Bolt Bag QTY. DESCRIPTION LOCATION 16 5 ⁄ 16 ''-18 x 1 ⁄ 2 '' Carriage Bolts Stand 16 5 ⁄ 16 '' Flat Washers Stand 16 .
G5049Z Combination Sander -7- Clean up The work table and other unpainted parts of the Model G5049Z are coated with a waxy oil that protects them from corrosion during shipment. Remove the protective coating with mineral spir- its and cloth rags. Do not use gasoline or other petroleum based solvents because of their extremely low flash points.
-8- G5049Z Combination Sander SECTION 4: ASSEMBLY Figure 2. Figure 4. Figure 3. Stand/motor 2. Carefully tip the sander on its side and attach the four legs to the stand top and the cross braces to the legs. 3. Lift the sander upright and remove the cover.
G5049Z Combination Sander -9- Figure 5. Align the center of the drive disc to the centerline of the jack shaft C/L Jackshaft Drive disc Figure 6. 10. Re-install the cover. 5. Mount the motor to the motor mount. Leave the bolts finger tight for now. 6.
-10- G5049Z Combination Sander 2. Turn the knob approximately 1 ⁄ 4 turn clock- wise to move the belt towards the tracking knob, counter-clockwise to move the belt away. 3. Turn the machine on and off again quickly to see if the tracking has improved.
G5049Z Combination Sander -11- 3. Tighten hex bolt and run the sander to adjust the tracking if necessary. 4. Try aggressively sanding a piece of scrap wood. If the tracking is not significantly affected and the belt does not slip on the drum, your belt tension is correct.
-12- G5049Z Combination Sander Horizontal Sanding 1. Turn the sander on and allow the belt to reach full speed. 2. Place the workpiece flat on the belt.
G5049Z Combination Sander -13- Curved Sanding To sand curves, use the end of the belt arm. Hold the workpiece firmly and apply light, even pres- sure to the belt. To avoid excessive loading of the belt in one area, move workpiece slowly across entire surface of belt.
-14- G5049Z Combination Sander SECTION 7: MAINTENANCE Lubrication V- Belt Your combination sander is equipped with shield- ed and pre-lubricated ball bearings and require no lubrication for the life of the bearings. All bear- ings are common sizes and are readily available from a local bearing supply house or our Service Department.
G5049Z Combination Sander -15- The following pages contain general machine specifications, parts diagram and list and Warranty/Return information for your Model G5049Z Combination Sander. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call our Service Department.
-16- G5049Z Combination Sander.
G5049Z Combination Sander -17-.
-18- G5049Z Combination Sander.
G5049Z Combination Sander -19-.
-20- G5049Z Combination Sander.
G5049Z Combination Sander -21- REF PART # DESCRIPTION REF PART # DESCRIPTION 36 P5049036 SCALE 37 P5049037 STOP BAR 38 P5049038 SPACER 39 P5049039 BRACE, SHORT 40 P5049040 BRACE, LONG 41 P5049041 STEE.
-22- G5049Z Combination Sander REF PART # DESCRIPTION 71 P5049071 WASHER 72 P5049072 STRAIN RELIEF 73 P5049073 DUST COVER 74 P5049074 SNAP RING 75 P5049075 BEARING 76 P5049076 SNAP RING 77 P5049077 SP.
G5049Z Combination Sander -23- Machine Data GRIZZLY MODEL G5049Z COMBINATION SANDER Design Type .......................................................................................................................... Floor Model Overall Dimensions and Specifications: Base .
-24- G5049Z Combination Sander Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
An important point after buying a device Grizzly G5049Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G5049Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G5049Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G5049Z you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G5049Z will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G5049Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G5049Z.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G5049Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G5049Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center