Instruction/ maintenance manual of the product G1036 Grizzly
Go to page of 14
SLOW-SPEED GRINDER MODEL G1036 INSTRUCTION MANUAL COPYRIGHT © 1993 BY GRIZZLY INDUSTRIAL, INC. REG. TX 3 627 012 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. REVISED FEBRUARY, 1999.
G1036 Slow-Speed Grinder -2- Table Of Contents PAGE I. INTRODUCTION ........................................................................................................3 II. SAFETY RULES FOR ALL TOOLS ..............................................
-3- G1036 Slow-Speed Grinder We are proud to offer the Model G1036 Slow- Speed Grinder. The Model G1036 is part of a growing Grizzly family of fine woodworking machinery.
G1036 Slow-Speed Grinder -4- 13. DO NOT OVERREACH. Keep proper footing and balance at all times. 14. MAINTAIN TOOLS IN TOP CONDITION. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
-5- G1036 Slow-Speed Grinder The Model G1036 Slow-Speed Grinder is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice.
G1036 Slow-Speed Grinder -6- 1. Working Clearances: Consider existing and anticipated needs, size of material to be processed through the machine, and space for work tables or other machinery when establishing a location for your slow-speed grinder. The Model G1036 is wired for 110V, single phase operation; it cannot be operated on 220V.
-7- G1036 Slow-Speed Grinder Figure 1. Knob to adjust eye shield. A. EYE SHIELD Attach the plastic eye shield to its mounting bracket using the 2 Phillips ® Head screws and nuts provided, then attach the eye shield assem- bly to the outside wheel guard just above the cut- away.
G1036 Slow-Speed Grinder -8- A. SAFETY RULES 1. While operating this machine, do not wear jewelry, loose clothing, necklaces or neckties. Long sleeves on shirts should be rolled up or securely buttoned at the cuff. 2. Persons with beards and/or long hair should consider the use of a hat, hair net or similar protective equipment.
-9- G1036 Slow-Speed Grinder Figure 5. Proper sharpening position. Fill the tank reservoir up to approximately 80% full when wet grinding. Do not leave the 10" wheel immersed in water for long periods of time if the grinder is not in use. See Water Reservoir section under the Maintenance heading.
G1036 Slow-Speed Grinder -10- Figure 6. Oil Feeder check ball. B. OIL FEEDER Apply a light machine oil to the oil feeder after every six hours of operation. Figure 6. A. GENERAL Make a habit of inspecting your Slow-Speed Grinder each time you use it. Check for the fol- lowing conditions and repair or replace when nec- essary.
-11- G1036 Slow-Speed Grinder in the reservoir once a week to avoid clogging the aluminum oxide wheel. A drain plug at the bottom of the reservoir can be removed to flush out the reservoir and remove sediment. Figure 8. Figure 8. Drain plug on reservoir.
G1036 Slow-Speed Grinder -12- E. CHANGING STONES The 4 1 / 2 " and 10" stones can both be removed for re-surfacing or replacement. To change the 4 1 / 2 " stone: 1. Remove the eye shield and and the outside wheel guard. 2. Turn the shaft nut counterclockwise while holding the stone.
-13- G1036 Slow-Speed Grinder The following pages contain general machine d a t a , parts diagram, parts list and W arranty/Return information for your Model G1036 Slow-Speed Grinder. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call the appropriate region- al Service Department.
G1036 Slow-Speed Grinder -14- To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then issue you a “Return Number’’, which must be clearly posted on the outside as well as the inside of the carton.
An important point after buying a device Grizzly G1036 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G1036 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G1036 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G1036 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G1036 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G1036, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G1036.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G1036. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G1036 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
