Instruction/ maintenance manual of the product Stainless Steel 3V Blade SSSMD-201 Greenheck
Go to page of 7
Model SSSMD-201 meets the requir ements for smoke dampers established by: National Fire Pr otection Association NFP A Standards 92A, 92B, 101 & 105 IBC International Building Codes New Y ork City .
Pr essur e Dr op Data SSSMD-201 This pressur e drop testing was conducted in accor dance with AMCA Standard 500-D using the thr ee configurations shown. All data has been corrected to r epresent standar d air at a density of .075 lb/ft 3 (1.201 kg/m 3 ).
AMCA 5.2 Pr essur e Dr op SSSMD-201 5D 6D 5D D = 4 (W) (H ) 3.14 Figure 5.3 Figure 5.2 Figure 5. 5 R Greenheck Fan Corporation certifies that the model SSSMD-201 shown herein is licensed to bear the AMCA Seal.
AMCA 5.3 Pr essur e Dr op SSSMD-201 5D 6D 5D D = 4 (W) (H ) 3.14 Figure 5.3 Figure 5.2 Figure 5. 5 Velocity (fpm) Pressure Drop (in. wg ) Velocity (fpm) Pressure Drop (in. wg ) Velocity (fpm) Pressure Drop (in. wg ) Velocity (fpm) Pressure Drop (in. wg ) 500 0.
AMCA 5.5 Pr essur e Dr op SSSMD-201 R Greenheck Fan Corporation certifies that the model SSSMD-201 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedur es performed in accordance with AMCA Publication 511 and comply with the requir ements of the AMCA Certified Ratings Programs.
Space Envelopes Required for Actuators and Accessories Externally mounted actuators always requir e space outside of the damper sideplate or sleeve. The “S” dimension illustrates the clearance requir ed for various available actuators. On dampers less than 18 in.
T ransitioned Damper Dimensions When a fire/smoke damper is being used in conjunction with r ound or oval ductwork, the SSSMD-201 can be supplied in a factory sleeve with round or oval transitions on both ends of the sleeve. Dampers should be order ed to the duct dimensions.
An important point after buying a device Greenheck Stainless Steel 3V Blade SSSMD-201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Greenheck Stainless Steel 3V Blade SSSMD-201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Greenheck Stainless Steel 3V Blade SSSMD-201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Greenheck Stainless Steel 3V Blade SSSMD-201 you will learn all the available features of the product, as well as information on its operation. The information that you get Greenheck Stainless Steel 3V Blade SSSMD-201 will certainly help you make a decision on the purchase.
If you already are a holder of Greenheck Stainless Steel 3V Blade SSSMD-201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Greenheck Stainless Steel 3V Blade SSSMD-201.
However, one of the most important roles played by the user manual is to help in solving problems with Greenheck Stainless Steel 3V Blade SSSMD-201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Greenheck Stainless Steel 3V Blade SSSMD-201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
