Instruction/ maintenance manual of the product SE1 Greenheck
Go to page of 40
1 Sidewall Propeller Fans Belt and Direct Drive Exhaust, Supply and Reversible December 2007.
2 Greenheck’s sidewall propeller fan line is the ideal choice for factory and warehouse applications where high volumes of air and low pressures are required.
3 Model Comparison Direct Drive Fan Selection Three propeller and drive frame combinations are available. Models SE1 and SS1 are designed for smaller size applications where lower volumes and static pressures are found. Models SE2, SS2, SCE3 and SCS3 are designed and constructed for applications with higher volumes and static pressures.
4 Mounting Options Overview wal l wall Mounting Option Description Page Standard W all Mounting Fan can be mounted directly to a wall. 5 Standard Horizontal Mounting Fan can be horizontally mounted to move air up or down. 6 W all Collar The wall collar is an easy way to mount the sidewall propeller fan and its accessories.
5 Mounting Fan Dir ectly to W all The split drawing below illustrates the typical ways of mounting fans directly to the wall when a wall housing or collar is not used.
6 Horizontally mounted fans are available for applications requiring vertical airflow. Typical applications include mounting fans in ductwork or plenums as transfer fans or suspending them from the ceiling in a wall housing for use as recirculation fans.
7 Wall collars offer an alternate method for mounting sidewall propeller fans and the optional accessories shown here. Standard construction is of galvanized steel (painted steel is optional) with heavy gauge mounting flanges and pre-punched mounting holes.
8 Wall housings are the safest, most efficient and sturdy platform for mounting sidewall propeller fans and their optional accessories. Wall housings allow for a wide range of mounting arrangements to meet specific applications.
9 The wall housing is designed to reduce installation time and provide maximum installation flexibility. Attached accessories such as backdraft dampers, guards and weatherhoods may mount to either end. As a result a wide variety of configurations are available to accommodate the needs of the system designer.
10 Filtered supply wall housings are available in seven sizes for fans ranging from size 24 to 54 inches (610 to 1372 mm). They are designed with the draw-thru concept to achieve the highest filter and fan efficiencies. Standard construction is galvanized steel (painted steel optional).
11 Backdraft Dampers Used alone or in conjunction with the wall housing or wall collar, backdraft dampers are available for exhaust or supply configurations. Backdraft dampers are constructed with galvanized frames, aluminum blades and vinyl blade seals.
12 Other Options and Accessories Electrical Disconnect Switches Toggle type and heavy duty disconnect switches are available for positive electrical shut-off and safety in servicing fans. The following switches are available to meet individual electrical requirements and can be factory mounted or shipped loose for field mounting.
13 Basics of Fan Selection Direct Drive Model Number Code The model number system is designed to completely identify the fan. The correct code letters must be specified to designate direct drive with exhaust or supply air configuration. The remainder of the model number is determined by the size and performance selected from pages 15 through 21.
14 Panel/Drive frame - Galvanized steel with one-piece drawn venturi Sizes 8-12; D, G, & E motor speeds - zinc plated heavy welded wire guard/support structure (paint optional). Sizes 12-24; A, B, & C motor speeds - bolted structural steel channels and motor plate.
15 Performance certified is for Models SE1/SS1 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal.
16 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate (paint optional). Propeller - Heavy duty, welded and gusseted painted steel. Motors - Heavy duty, permanently lubricated, ball bearing type.
17 Direct Drive - Level 2 Model SE2 for exhaust — Model SS2 for supply Performance certified is for Models SE2/SS2 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
18 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate. (paint optional). Propeller - Heavy duty, cast aluminum. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max.
19 Direct Drive - Level 3 Model SCE3 for exhaust — Model SCS3 for supply Performance certified is for Models SCE3/SCS3 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
20 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate. (paint optional). Propeller - Heavy duty, cast aluminum. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max.
21 Direct Drive - Level 3 - Reversible Model SCR3 Reversible for exhaust and supply Performance certified is for Model SCR3 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
22 The model number system is designed to completely identify the fan. The correct code letters must be specified to designate belt drive with exhaust or supply air configuration. The remainder of the model number is determined by the size and performance selected from pages 26 through 38.
23 Propeller - Galvanized steel, riveted blades (aluminum optional). Bearings - Stamped steel pillow blocks up to size 36 and cast pillow blocks for size 42 and larger. Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/bearing plate (paint optional).
24 Propeller - Reinforced galvanized steel, riveted blades, keyed hub. Bearings - Cast iron pillow blocks with grease fittings. Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/bearing plate (paint optional).
25 Propellers - SBE-3/SBS-3 - Heavy duty, welded, reinforced, steel blades coated in Permatector™. SBCE-3/SBCS-3 - Heavy duty, cast aluminum blades. All with keyed hubs.
26 Using The Performance Table Shown below is a portion of a typical performance table used in this catalog. Performance data shown offers the best selections for each propeller type (“L” or “H”) relative to sound, RPM and static pressure. Consider “L” type propellers first for most applications.
27 24 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
28 30 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
29 36 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 551 H - 694 Max Motor Frame Size - 56 TS = RPM x 7.
30 42 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 424 H - 533 Max Motor Frame Size - 145T TS = RPM x 10.
31 48 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 355 H - 429 Max Motor Frame Size - 145T TS = RPM x 12.
32 54 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 343 H - 377 Max Motor Frame Size - 145T TS = RPM x 13.
33 60 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
34 24-30 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Performance certified is for Models SBCE/SBCS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
35 36-42 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 36 Performance Max RPM L - 1183 H - 1480 Max Motor Frame Size - 184T TS = RPM x 9.
36 48-54 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 48 Performance Max RPM L - 908 H - 1182 Max Motor Frame Size - 215T TS = RPM x 12.
37 60-72 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 60 Performance Max RPM L - 620 H - 775 Max Motor Frame Size - 254T TS = RPM x 15.
38 24-72 Belt Drive SBCR Reversible (Exhaust and Supply) Performance certified is for Model SBCR for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).
39 Belt Drive Specifications Belt Drive Belt driven, axial type sidewall fans shall be provided as follows: Propellers shall be constructed with fabricated steel, fabricated aluminum, or cast aluminum blades and hubs. Propellers shall be securely attached to fan shafts.
Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option when returned to our factory, transportation prepaid.
An important point after buying a device Greenheck SE1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Greenheck SE1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Greenheck SE1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Greenheck SE1 you will learn all the available features of the product, as well as information on its operation. The information that you get Greenheck SE1 will certainly help you make a decision on the purchase.
If you already are a holder of Greenheck SE1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Greenheck SE1.
However, one of the most important roles played by the user manual is to help in solving problems with Greenheck SE1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Greenheck SE1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
