Instruction/ maintenance manual of the product H-CUBE. Greenheck
Go to page of 8
High Wind and Hu rrica ne Zone F ans Mo dels H- G, H-GB, H-CU E and H-C UBE Belt and D ir ect D rive E xhau st Fans November 2006 The Hurricane season has brought a new level of attention to wind resistance in the HV AC Industry . As you know , 2005 ended the worst hurricane season in history .
® High Wind and Hurricane Zone Fans Withstands winds up to 150 MPH The Greenheck Models H-G and H-GB ar e downblast roof exhaust fans. Applications include general clean air and light moisture exhaust. The downblast design is ideal for all applications wher e air is discharged directly onto the r oof surface.
® The Greenheck high wind models have been thor oughly tested in accordance with r ecognized standards. With the H-G, H-GB, H-CUE and the H-CUBE you are not only getting a superior pr oduct built by .
® Model H-CUE or H-CUBE H-GPF or SD Curb Model H-G or H-GB Fastener Fastener Tie Down is optional on sizes 060 - 240 Fasteners on each side of the fan are to be installed with one fastener 4 inches (102 mm) fr om each edge and one fastener centered. The r emaining fasteners are to be equally spaced.
® Roof Opening Minimum 12 Ga. Steel Roof T russ Outside Flange Center fasteners on fl ange Use #12-14 self-drilling screws or equal. Fasteners one on each corner as detailed. Each side at center of unit. Maximum fastener spacing of 8 inches (203 mm) , add additional fasteners to satisfy .
® Specifi cations Centrifugal Downblast Roof Exhaust Fans H-G — Direct Drive Model H-G spun aluminum exhaust fans shall be centrifugal direct driven type. The fan wheel shall be centrifugal backwar d inclined, constructed of aluminum and shall include a wheel cone carefully matched to the inlet cone for pr ecise running tolerances.
® Specifi cations Centrifugal Upblast Roof Exhaust Fans H-CUE — Direct Drive Model H-CUE spun aluminum exhaust fans shall be centrifugal direct driven type. The fan wheel shall be backwar d inclined, constructed of aluminum and shall include a wheel cone carefully matched to the inlet venturi for pr ecise running tolerances.
P .O . Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com Promo High Wind & Hurricane Fans RG Rev . 2 November 2006 Copyright © 2006 Greenheck Severe Duty Products Model USGF is a leader in severe wind and sever e grease applications.
An important point after buying a device Greenheck H-CUBE. (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Greenheck H-CUBE. yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Greenheck H-CUBE. - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Greenheck H-CUBE. you will learn all the available features of the product, as well as information on its operation. The information that you get Greenheck H-CUBE. will certainly help you make a decision on the purchase.
If you already are a holder of Greenheck H-CUBE., but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Greenheck H-CUBE..
However, one of the most important roles played by the user manual is to help in solving problems with Greenheck H-CUBE.. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Greenheck H-CUBE. along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
