Instruction/ maintenance manual of the product V3000/V2000 American Audio
Go to page of 8
PROFESSIONAL POWER AMPLIFIERS User Instructions I O channel 1 channel 2 V 3000 American DJ SIG 20 10 10 20 SIG 5 5 CLIP CLIP PROTECT PROTECT POWER LIMITER LIMITER ON ON PRO former Series Professional Stereo Amplifier professional products designed for installations and the working dj.
For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS. OR ANY COMBINA TION OF SPEAKERS THA T TOGETHER ARE LESS THAN 2 OHMS PER SIDE! • Using one speaker , it must be rated at 2 ohms minimum. • Using two speakers, they must be rated each at 4 ohms minimum.
+ 1: Power Switch 2: Channel 1 gain controls 3: Channel 2 gain controls 4: Power ON indicator 5: Channel 1 indicators 6: Channel 2 indicators 7: Channel 1 protect indicators 8: Channel 2 protect indic.
BRIDGE MONO (T ypical Settings) STEREO SUBWOOF ONE NORMAL / ONE SUBWOOF (BI-AMP) + 1 23 4 + + + + + + + + + + + FUSE STEREO BRIDGE AMP MODE FREQUENCY FREQUENCY SUB WOOF SUB WOOF INPUT THRU CAUTION MINIMUM LOAD IMPEDANCE 2 OHM PER CHANNEL 4 OHM BRIDGE LIFT GROUND NORMAL NORMAL INPUT BAL.
SUBWOOFER (V3000 ONL Y) The subwoofer can be operated in stereo or bridge mono, set the switch to subwoofer position depending on your application, select the frequency from 20 Hz to 200 Hz via variable frequency selector .
•BALANCED •SYMETRIQUE •SYMMETRISCHE •BALANCEADO GROUND INVERTING INPUT - •UNBALANCED •ASYMETRIQUE •UNSYMMETRISCHE •UNBALANCEADO NON-INVERTING INPUT + GROUND NON-INVERTING INPUT + INPUTS OUTPUTS (Banana Jack Connection) Strip back insulation 13-mm.
OPERA TION CONFIGURING THE AMPLIFIER A 4-position dip switch on the rear panel allows you to configure certain amplifier characteristics. A diagram on the rear panel shows the individual switch functions and settings.. LOW -CUT FIL TER: Setting position 1 to “ON” enables the low-cut filter on channel 1 and “OFF” disables it.
SPECIFICA TIONS Output Power: 2 ohms, 1 khz 1% THD 4 ohms, 1khz, 1% THD 8 ohms, 1khz 1% THD (Bridge Mode, mono) 4 ohms, 1khz, 1% THD 8 ohms, 1khz, 1% THD T otal Harmonic Distortion: 20Hz-20khz, @ rate.
An important point after buying a device American Audio V3000/V2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Audio V3000/V2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Audio V3000/V2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Audio V3000/V2000 you will learn all the available features of the product, as well as information on its operation. The information that you get American Audio V3000/V2000 will certainly help you make a decision on the purchase.
If you already are a holder of American Audio V3000/V2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Audio V3000/V2000.
However, one of the most important roles played by the user manual is to help in solving problems with American Audio V3000/V2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Audio V3000/V2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
