Instruction/ maintenance manual of the product 309525G Graco
Go to page of 16
309525G EN Instructions Water-Jacket Heated Hose Kit Part No. 245866 Includes parts needed to assemble heated hose system. Heated hose assembly and VISCON HP heater must be ordered separately. See Technical Data on page 14 for Maximum Working Pressure and Temperature Rating information.
Manual Conventions 2 309525G Contents Manual Conventions ........................ 2 Heated Hose Components ................... 4 Installation ................................ 7 Operation ................................ 1 0 Maintenance ...............
Warning 309525G 3 ELECTRIC SHOCK HAZARD Improper grounding, wiring, or usage of the system can cause electric shock. • All electrical wiring must be done by a qualified electrician and comply with all local codes and regu- lations. • Connect only to grounded power source.
Heated Hose Components 4 309525G Heated Hose Components You need the following parts to install the heated hose system on the Xtreme Mix proportioner. Heated Hose Kit 245866 The kit described in this manual, which includes all miscellaneous parts needed to assemble the system.
Heated Hose Components 309525G 5 Fluid Heater Order separately a VISCON HP heater that meets local electrical and hazardous location requirements. Hazardous Location Heaters Non-hazardous Location Heaters Part No. Series VAC (50/60 Hz single phase) / Watts / Amps Approvals 245848 A 120 / 2300 / 19.
Heated Hose Components 6 309525G.
Installation 309525G 7 Installation F IG . 1: Fluid and Air Line Connection Schematic 6 3, 7, 22, 25 10, 11, 15 24 10, 15, 23 12, 15 B 13, 15 14, 15 1 1 1 16 C 5 RED BLUE 14, 15 17 14, 15 C 14, 15 Res.
Installation 8 309525G Installing the Kit Refer to F IG . 1 and F IG .2 1. Mount pump (16) on the Xtreme Mix cart (D) using the bracket (21), lockwashers (4), and nuts (2).
Installation 309525G 9 F IG . 2: Kit Installation 3 7 22 17 6 D 2 15 14 20 19 1 15 12 B 10 15 8 15 13 11 9 8 A 21 16 2 4 14 15 1 15 10 23 24 4 25.
Operation 10 309525G Operation Refer to F IG .2 1. Select fluid to use for heating circulation. • If ambient temperatures (storage or operating) are below 40° F (4.4° C), a 50% water and 50% antifreeze mixture is recommended. • If ambient temperatures are above 40° F (4.
Maintenance 309525G 11 Maintenance • Check reservoir tank fluid level daily. Add fluid as needed. • Follow pump maintenance instructions in Husky 716 manual. • Follow heater maintenance instructions in VISCON HP manual. Troubleshooting Related Manuals Refer to the following manuals for detailed equipment information.
Parts 12 309525G Parts 3 7 22 17 6 D 2 15 14 20 19 1 15 12 B 10 15 8 15 13 11 9 8 A 21 16 2 4 14 15 1 15 10 23 24 4 25.
Parts 309525G 13 * Not available from Graco. ** If you are plumbing resin and catalyst hoses in par- allel, purchase 4 additional tees (117425) and 12 additional inserts (117426). Ref. No. Part No. Description Qty. 1* --- TUBING; polyurethane; 1/2” (13 mm) OD; 10 ft.
Technical Data 14 309525G Technical Data Maximum Working Pressure High Pressure Fluid Hose ..................... S e e Heated Hose Assembly table, page 4 Heated Fluid Circulation Components ............ 9 5p s i (0.6 MPa, 6.6 bar) Maximum Temperature Rating .
Heated Hose Replacement Parts 309525G 15 Heated Hose Replacement Parts Order the quantity required for your hose. Accessory Scuff Jacket Use to cover and protect heated hose.
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English.
An important point after buying a device Graco 309525G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 309525G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 309525G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 309525G you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 309525G will certainly help you make a decision on the purchase.
If you already are a holder of Graco 309525G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 309525G.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 309525G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 309525G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
