Instruction/ maintenance manual of the product DV3140 GoVideo
Go to page of 40
.
2 Safety Precautions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 INTRODUCTION IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future refer- ence.
4 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . .
5 INTRODUCTION Before Use Playable Discs DVD 3 inch/5 inch (8 cm/12 cm) disc Audio CD 3 inch/5 inch (8 cm/12 cm) disc In addition, this unit can play a CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files.
6 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy . For maximum protection, re-pack the unit as it was originally packaged at the factory . When setting up the unit The picture and sound of a nearby TV , VCR, or radio may be distorted during playback.
7 INTRODUCTION Front Panel P AUSE ( X X ) Pause playback of a disc in the DVD deck temporarily . Press repeatedly for frame-by-frame playback. Child Lock The control buttons on the front panel of the DVD+VCR can be switched off so that your DVD+VCR can only be operated using the remote control.
8 Display Window DVD VCR REC PM TV [P] A timer recording is programmed or in progress (VCR deck only). A cassette is in the VCR deck. The VCR deck is selected. DVD+VCR is Recording. (VCR deck only) Indicates PM time. (AM is not displayed.) Lights when TV mode is active (See page 22.
9 INTRODUCTION Remote Control ote The remote control uses one set of playback buttons to operate both decks: To use the VCR, first press the VCR button. To use the DVD, first press the DVD button. DVD & VCR select buttons Sets the remote control to operate either the DVD deck or the VCR deck.
10 Rear Panel Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor , Another VCR).
11 PREP ARA TION Connections T ips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 1 1-13. Please refer to the manuals of your TV , VCR, Stereo System or other devices as necessary to make the best connections.
12 Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF .OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R) .
13 PREP ARA TION Connections (Continued) Optional, Preferred TV Connections (Continued) ote Y ou can ONL Y listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF .OUT (R) or DVD/VCR AUDIO OUT (A1) jacks.
14 On-Screen Display (OSD) The On-Screen display provides feedback on the cur- rent status of the DVD+VCR. ❶❷ ❸ ❹ ❺ ❻❼ ❶ T APE SPEED DISPLA Y Shows the current tape speed. ❷ FUNCTION DISPLA Y Indicates the function in progress. ❸ HI-FI DISPLA Y Indicates when this unit is playing back tape recorded in Hi-Fi.
15 PREP ARA TION VCR Operation Setup (Continued) Setting the VCR Setup Menu 1 1 Press MENU and the MAIN menu will appear . 2 2 Press v v / V V to select the SETUP menu, then press ENTER. The SETUP menu will appear . 3 3 Press v v / V V to choose a desired option on the SETUP menu.
16 VCR Operation Setup (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: the Auto Clock Feature or manually . The Auto Clock Feature enables the DVD+VCR to set the clock when the DVD+VCR is turned off. Auto Clock Set The Auto Clock Set feature is set to ON at the factory .
17 DVD Operation Setup PREP ARA TION Caution: Before using the remote control, press the DVD button to select the device to be operated. General Explanation This manual gives basic instructions for operating the DVD+VCR. Some DVDs require specific operations or allow only limited operations during playback.
18 DVD Operation Setup (Continued) Initial Settings In this menu system, there are several ways to cus- tomize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.
19 PREP ARA TION DVD Operation Setup (Continued) AUDIO Each DVD disc has a variety of audio output options. Set the player ’s Audio Output according to the type of audio system you use.
20 DVD Operation Setup (Continued) LOCK Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
21 Operation with tape OPERA TION Normal Playback Preparation: T urn on the TV . T une the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV , set the TV’s source selector to VIDEO.
22 Operation with tape (Continued) Normal Recording Preparation: Tu rn on the power of both the DVD+VCR and TV . T une the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO.
23 OPERA TION Operation with tape (Continued) 1 1 0 0 Use V V to choose the SPEED option. Use b b / B B to choose the desired recording speed (AUTO, SP or SLP). AUTO mode determines how long tape is left and switches speed from SP to SLP , if necessary , to complete recording the program.
24 Operation with tape (Continued) Instant Timer Recording Instant T imer Recording allows you to make a recording easily of a preset length without using the program timer . Preparation: Tu rn on the power of both the DVD+VCR and the TV . Be sure the TV is tuned to the DVD+VCR output channel (3 or 4).
25 OPERA TION Operation with tape (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.
26 Operation with tape (Continued) T ape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and sec- onds. Press CLK/CTR to select the real-time counter display . Every press of CLK/CTR changes the TV screen as illustrated below .
27 OPERA TION Operation with DVD Playing DVD Playback Setup T urn on the TV and select the video input source con- nected to the DVD+VCR. Audio system: T urn on the audio system and select the input source connected to the DVD+VCR. Set the Output Source to DVD as shown in “Setting the Output Source” on page 6.
28 Operation with DVD (Continued) General Features (Continued) Repeat DVD Video Discs - Repeat Chapter/T itle/Off 1 To repeat the currently playing chapter , press REPEA T . The Repeat Chapter icon appears on the TV screen. 2 To repeat the title currently playing, press REPEA T a second time.
29 OPERA TION Operation with DVD (Continued) General Features (Continued) Special DVD Features Checking the contents of DVD Video discs: Menus DVDs may contain menus that allow you to access spe- cial features. T o use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option.
30 Operation with Audio CD and MP3/WMA Discs Playing an Audio CD and MP3/WMA Discs The DVD+VCR can play an audio CD. Also, the DVD+VCR can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on the right side of this page.
31 OPERA TION Operation with Audio CD and MP3/WMA Discs (Continued) Pause 1 Press P AUSE/STEP ( X ) during playback. 2 To return to playback, press PLA Y ( N ) or press P AUSE/STEP ( X ) again.
Operation with Photo Disc V iewing a Photo Disc This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the "Notes on JPEG Recordings" at right. 1 1 Insert a disc and close the tray . The JPEG menu appears on the TV screen.
33 Programmed Playback WMA MP3 CD Programmed Playback with Audio CD and MP3/WMA Discs The Program function enables you to store your favorite tracks from any disc in the player memory . Program can contain 99 tracks (Audio CD) or 300 tracks (MP3/WMA).
T roubleshooting 34 Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The DVD+VCR does not start playback. The remote control does not work properly . Cause The power cord is disconnected.
35 T roubleshooting (Continued) REFERENCE Symptom Some channels are skipped over when using CH ( v / V ) Picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via A/V input to DVD+VCR is not shown on TV screen.
36 T roubleshooting (Continued) V ideo Head Cleaning V ideo head clogging The video heads are the means by which the unit reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back.
37 REFERENCE Language Code List Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Ay mara 6588 Azerbaijani 6590 Bashkir 6665 Basq.
38 Country Code List Country Code Afghanistan AF Albania AL Algeria DZ American Samoa AS Andorra AD Angola AO Anguilla AI Antarctica AQ Antigua and Barbuda AG Argentina AR Armenia AM Aruba A W Austral.
39 REFERENCE Specifications General Power requirements AC 120V , 60 Hz Power consumption 21W Dimensions (approx.) 430 X 78.5 X 273 mm (16.9 x 3.1 x 10.
Who Provides the Limited Warranty During the warranty period, the GoVideo W arranty Administrator will honor service for 90 days labor , 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage.
An important point after buying a device GoVideo DV3140 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GoVideo DV3140 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GoVideo DV3140 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GoVideo DV3140 you will learn all the available features of the product, as well as information on its operation. The information that you get GoVideo DV3140 will certainly help you make a decision on the purchase.
If you already are a holder of GoVideo DV3140, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GoVideo DV3140.
However, one of the most important roles played by the user manual is to help in solving problems with GoVideo DV3140. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GoVideo DV3140 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
