Instruction/ maintenance manual of the product BG834HPL Global Machinery Company
Go to page of 13
INSTRUCTION MANU AL 150mm (6") 1/2HP / 200mm (8") 3/4HP Bench Grinders • Melbourne • Perth • Auckland • Hong K ong • Shanghai • T aipei • New Y ork • V erona • London • P.
Contents W arranty 2 Introduction 3 Environment al protection 3 Description of s ymbols 3 Specifications 3 Safety instructions 4 A dditional safety rules f or bench grinders 6 Unpacking 6 Connecting t.
Description of s ymbols The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use . W ear hearing protection. W ear eye protection. W ear breathing protection. Conforms to relevant standards f or electromagnetic compatibility.
Safety instructions The tool must be used only for the prescribed purpose . Any uses other than those mentioned in this manual will be considered a case of misuse . The user and not the manufacturer shall be liable f or any damage or injury resulting from such cases of misuse .
8. Use safety accessories. Safety glasses and earmuff s should always be worn. A face or dust mask is also required. 9. Do not abuse the pow er cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges.
A dditional safety rules for bench grinders • Always remove the plug from the mains socket before making any adjustments or maintenance , including changing the wheel. • Always wear eye protection and check that the eye shields on the grinder are properly adjusted.
Know y our product Before using the bench grinder , familiarise yourself with all the operating features and safety requirements. The GMC Bench Grinders are designed for light to moderate duty applications in a home environment. They are not intended for use by trade persons .
8 Caution. During use it is important not to overload the grinder . The grinder should run at close to full speed. If you are applying too much pressure the grinder will start to slow down. Under these conditions, remove the part being ground and allow the grinder to return to full speed.
Note . The tool rests are right and left handed. Follow the diagrams to ensure the correct tool rest is fitted to the correct side . Important. Prior to fitting the tool rests , ensure the grinder is turned off and the power plug is removed from the socket.
Operation Important. Prior to using the grinder , check that the eye shields, spark deflectors , and tool rests are fitted and correctly adjusted and that you are wearing safety gear including eye , hearing and breathing protection.
Fitting a wire wheel Y our bench grinder is capable of fitting a wire wheel instead of a grinding wheel. When fitting a wire wheel ensure the wire wheel is the correct size for the grinder and also ensure the bore size o f the wheel is correct for the spindle o f the grinder .
Cleaning 1. K eep the outside of the grinder clean by brushing grinding dust and dirt away from all areas where the dust tends to build up. Wear eye protection when brushing. 2. Wipe the guards and grinder with a so ft damp cloth. A mild detergent can also be used.
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New.
An important point after buying a device Global Machinery Company BG834HPL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Global Machinery Company BG834HPL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Global Machinery Company BG834HPL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Global Machinery Company BG834HPL you will learn all the available features of the product, as well as information on its operation. The information that you get Global Machinery Company BG834HPL will certainly help you make a decision on the purchase.
If you already are a holder of Global Machinery Company BG834HPL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Global Machinery Company BG834HPL.
However, one of the most important roles played by the user manual is to help in solving problems with Global Machinery Company BG834HPL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Global Machinery Company BG834HPL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
