Instruction/ maintenance manual of the product Z-34, Z-22IC Genie
Go to page of 40
Operator’ s Manual Fourth Edition First Printing Part No. 1000048 with Maintenance Information IC Power.
Operator's Manual Fourth Edition • First Printing Z-34/22 IC Part No. 1000048 Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 1 Safety Rules Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury . Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
Operator's Manual Fourth Edition • First Printing 2 Z-34/22 IC Part No. 1000048 SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 3 Do not drive over 0.6 mph / 1 km/h with the primary boom raised or extended or the secondary boom raised. Do not raise the boom when wind speeds may exceed 28 mph / 12.
Operator's Manual Fourth Edition • First Printing 4 Z-34/22 IC Part No. 1000048 SAFETY RULES Do not push the machine or other objects with the boom. Do not contact adjacent structures with the boom. Do not tie the boom or platform to adjacent structures.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 5 Collision Hazards Be aware of limited sight distance and blind spots when driving or operating. Be aware of the boom position when rotating the turntable. Check the work area for overhead obstructions or other possible hazards.
Operator's Manual Fourth Edition • First Printing 6 Z-34/22 IC Part No. 1000048 SAFETY RULES Explosion and Fire Hazards Do not start the engine if you smell or detect liquid petroleum gas (LPG), gasoline, diesel fuel or other explosive substances.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 7 SAFETY RULES Decal Legend Genie product decals use symbols, color coding and signal words to identify the following: Safety alert symbol—used to alert personnel to potential personal injury hazards.
Operator's Manual Fourth Edition • First Printing 8 Z-34/22 IC Part No. 1000048 Controls Platform Control Panel 1 Drive enable switch 2 Drive enable indicator light 3 Auxiliary power switch 4 P.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 9 CONTROLS Ground Control Panel 1 Turntable rotate switch 2 Platform rotate switch 3 Primary boom up/down switch 4 .
Operator's Manual Fourth Edition • First Printing 10 Z-34/22 IC Part No. 1000048 Legend 1 Non-steer tire 2 Steer tire 3 Ground controls 4 Secondary boom 5 Primary boom 6 Jib boom 7 Platform con.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 11 Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
Operator's Manual Fourth Edition • First Printing 12 Z-34/22 IC Part No. 1000048 PRE-OPERATION INSPECTION Pre-operation Inspection o Be sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 13 Maintenance Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator.
Operator's Manual Fourth Edition • First Printing 14 Z-34/22 IC Part No. 1000048 MAINTENANCE Check the Engine Oil Level Maintaining the proper engine oil level is essential to good engine performance and service life. Operating the machine with an improper oil level can damage engine components.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 15 Scheduled Maintenance Maintenance performed quarterly, annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for this machine.
Operator's Manual Fourth Edition • First Printing 16 Z-34/22 IC Part No. 1000048 Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 17 FUNCTION TESTS 1 Select a test area that is firm, level and free of obstruction. At the Ground Controls 2 Turn the key switch to ground control. 3 Pull out the red Emergency Stop button to the on position.
Operator's Manual Fourth Edition • First Printing 18 Z-34/22 IC Part No. 1000048 FUNCTION TESTS At the Platform Controls Test the Emergency Stop 1 5 Turn the key switch to platform control and restart the engine. 1 6 Push in the platform red Emergency Stop button to the off position.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 19 FUNCTION TESTS Test Drive and Braking 2 9 Press down the foot switch. 3 0 Slowly move the drive control handle in the direction indicated by the blue arrow on the control panel until the machine begins to move, then return the handle to the center position.
Operator's Manual Fourth Edition • First Printing 20 Z-34/22 IC Part No. 1000048 Test Limited Drive Speed 3 7 Press down the foot switch. 3 8 Raise the primary boom 1 foot / 30 cm. 3 9 Slowly move the drive control handle to the full drive position.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 21 W orkplace Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
Operator's Manual Fourth Edition • First Printing 22 Z-34/22 IC Part No. 1000048 Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 23 OPERATING INSTRUCTIONS Starting the Engine 1 At the ground controls, turn the key switch to the desired position. 2 Be sure both ground and platform control red Emergency Stop buttons are pulled out to the on position.
Operator's Manual Fourth Edition • First Printing 24 Z-34/22 IC Part No. 1000048 Operation from Platform 1 Turn the key switch to platform control. 2 Pull out both ground and platform red Emergency Stop buttons to the on position. 3 Gasoline/LPG models: Choose fuel by moving the fuel select switch to the desired position.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 25 Driving on a slope Determine the uphill, downhill and side slope ratings for the machine and determine the slope grade.
Operator's Manual Fourth Edition • First Printing 26 Z-34/22 IC Part No. 1000048 Drive Enable Light on indicates that the boom has moved just past either non- steer wheel and the drive function has been interrupted. To drive, hold the drive enable switch to either side and slowly move the drive control handle off center.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 27 Platform Overload Indicator Light (if equipped) Light flashing indicates the platform is overloaded and no functions will operate. Remove weight from the platform until the light goes off.
Operator's Manual Fourth Edition • First Printing 28 Z-34/22 IC Part No. 1000048 Decals Part No. Decal Description Quantity 27564 Danger - Electrocution Hazard 2 28158 Label - Unleaded 1 28159 .
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 29 DECALS Ground Controls Side Engine Side Shading indicates decal is hidden from view, i.
Operator's Manual Fourth Edition • First Printing 30 Z-34/22 IC Part No. 1000048 DECALS Inspection for Decals with Symbols Determine whether the decals on your machine have words or symbols. Use the appropriate inspection to verify that all decals are legible and in place.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 31 DECALS Ground Controls Side Engine Side Shading indicates decal is hidden from view, i.
Operator's Manual Fourth Edition • First Printing 32 Z-34/22 IC Part No. 1000048 T ransport and Lifting Instructions Observe and Obey: The transport vehicle must be parked on a level surface. The transport vehicle must be secured to prevent rolling while the machine is being loaded.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 33 TRANSPORT AND LIFTING INSTRUCTIONS Securing to T ruck or T railer for T ransit Always chock the machine wheels in preparation for transport. Turn the key switch to the off position and remove the key before transporting.
Operator's Manual Fourth Edition • First Printing 34 Z-34/22 IC Part No. 1000048 TRANSPORT AND LIFTING INSTRUCTIONS Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 35 Specifications Z-34/22 2WD Industrial Height, working maximum 40 ft 6 in 12.5 m Height, platform maximum 34 ft 6 in 10.5 m Height, stowed maximum 6 ft 7 in 2 m Horizontal reach maximum 22 ft 3 in 6.
Operator's Manual Fourth Edition • First Printing 36 Z-34/22 IC Part No. 1000048 SPECIFICATIONS Z-34/22 2WD and 4WD RT Height, working maximum 40 ft 10 in 12.6 m Height, platform maximum 34 ft 10 in 10.6 m Height, stowed maximum 6 ft 9 in 2 m Horizontal reach maximum 22 ft 3 in 6.
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 37 Range of Motion SPECIFICATIONS.
Distributed By: California Proposition 65 W ARNING W ARNING The exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.
An important point after buying a device Genie Z-34, Z-22IC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genie Z-34, Z-22IC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genie Z-34, Z-22IC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genie Z-34, Z-22IC you will learn all the available features of the product, as well as information on its operation. The information that you get Genie Z-34, Z-22IC will certainly help you make a decision on the purchase.
If you already are a holder of Genie Z-34, Z-22IC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genie Z-34, Z-22IC.
However, one of the most important roles played by the user manual is to help in solving problems with Genie Z-34, Z-22IC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genie Z-34, Z-22IC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
