Instruction/ maintenance manual of the product GS-3384 Genie
Go to page of 36
Operator’ s Manual with Maintenance Information Second Edition Third Printing Part No. 82828 CE Models.
Genie GS-3384 and GS-3390 and GS-4390 and GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing Copyright © 2002 by Genie Industries First Edition: First Printing, January 2002 Second Edition: Third Printing, March 2008 "Genie" is a registered trademark of Genie Industries in the U.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 1 Operator's Manual Second Edition • Third Printing Safety Rules Danger F ailure to obey the instructions and saf ety r ules in this manual will result in death or ser ious injur y .
2 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No . 82828 Operator's Manual Second Edition • Third Printing Tip-over Hazards Occupants, equipment and materials must not exceed the maximum platform capacity.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 3 Operator's Manual Second Edition • Third Printing SAFETY RULES Do not alter or disable the limit switches.
4 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No . 82828 Operator's Manual Second Edition • Third Printing SAFETY RULES Do not modify or alter an aerial work platform without prior written permission from the manufacturer.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 5 Operator's Manual Second Edition • Third Printing Fall Hazards The guardrail system provides fall protection.
6 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No . 82828 Operator's Manual Second Edition • Third Printing SAFETY RULES Damaged Machine Hazards Do not use a damaged or malfunctioning machine. Conduct a thorough pre-operation inspection of the machine and test all functions before each work shift.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 7 Operator's Manual Second Edition • Third Printing SAFETY RULES Outrigger Safety Tip-over Hazards Do not lower the outriggers unless the machine is on a firm surface. Avoid drop-offs, holes, unstable or slippery surfaces and other possible hazardous conditions.
8 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No . 82828 Operator's Manual Second Edition • Third Printing Legend 1 Lanyard anchorage point 2 GFCI outlet 3 Platform controls .
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 9 Operator's Manual Second Edition • Third Printing Controls Ground Control Panel 1 Key switch for platform/off/ground .
10 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing CONTROLS 1 Outrigger function enable button with indicator light 2 .
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 11 Operator's Manual Second Edition • Third Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
12 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing PRE-OPERATION INSPECTION Pre-operation Inspection R Be sure that the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 13 Operator's Manual Second Edition • Third Printing Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator.
14 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing MAINTENANCE Check the Engine Oil Level Maintaining the proper engine oil level is essential to good engine performance and service life.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 15 Operator's Manual Second Edition • Third Printing Check the Engine Coolant Level Maintaining the engine coolant at the proper level is essential to engine service life.
16 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 17 Operator's Manual Second Edition • Third Printing FUNCTION TESTS Test Up/Down Functions and Function Enable The audible warnings on this machine come from the same central alarm.
18 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing FUNCTION TESTS Test Drive and Braking 2 7 Press and hold the function enable switch on the control handle.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 19 Operator's Manual Second Edition • Third Printing FUNCTION TESTS Test the Up Limit Switch and the Outriggers - GS-5390 3 4 Push and hold the lift function enable button.
20 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing W orkplace Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 21 Operator's Manual Second Edition • Third Printing Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
22 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing Gasoline/LPG models: In cold conditions, -6°C and below, the machine should be started on gasoline and warmed for 2 minutes, then switched to LPG.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 23 Operator's Manual Second Edition • Third Printing To Position Platform 1 Push and hold the lift function enable button. 2 Activate the up/down rocker switch in the desired direction.
24 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing OPERATING INSTRUCTIONS Operation From Ground with Controller Maintain safe distances between operator, machine and fixed objects.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 25 Operator's Manual Second Edition • Third Printing T ranspor t and Lifting Instructions Observe and Obey: Common sense and planning must be applied to control the movement of the machine when lifting it with a crane.
26 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing Securing to T ruc k or T railer for T ransit Always chock the machine wheels in preparation for transport. Retract and secure the extension deck(s).
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 27 Operator's Manual Second Edition • Third Printing Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight.
28 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing Decals Decal Inspection Use the pictures on the next page to verify that all decals are legible and in place. Below is a numerical list with quantities and descriptions.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 29 Operator's Manual Second Edition • Third Printing DECALS Engine Side Ground Controls Side.
30 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing GS-3384 Height, working maximum 12.1 m Height, platform maximum 10.1 m Height, stowed maximum 2.7 m Rails up Height, stowed maximum 2.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 31 Operator's Manual Second Edition • Third Printing GS-3390 Height, working maximum 12.1 m Height, platform maximum 10.1 m Height, stowed maximum 2.7 m Rails up Height, stowed maximum 2.
32 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 P ar t No. 82828 Operator's Manual Second Edition • Third Printing GS-4390 Height, working maximum 15.1 m Height, platform maximum 13.1 m Height, stowed maximum 2.9 m Rails up Height, stowed maximum 2.
P ar t No . 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 33 Operator's Manual Second Edition • Third Printing GS-5390 Height, working maximum 18.2 m Height, platform maximum 16.2 m Height, stowed maximum 3.2 m Rails up Height, stowed maximum 2.
Distr ib uted b y: Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone +61 7 3375 1660 Fax +61 7 3375 1002 Genie China Phone +8.
An important point after buying a device Genie GS-3384 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genie GS-3384 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genie GS-3384 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genie GS-3384 you will learn all the available features of the product, as well as information on its operation. The information that you get Genie GS-3384 will certainly help you make a decision on the purchase.
If you already are a holder of Genie GS-3384, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genie GS-3384.
However, one of the most important roles played by the user manual is to help in solving problems with Genie GS-3384. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genie GS-3384 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
