Instruction/ maintenance manual of the product 82297 Genie
Go to page of 16
Operator’ s Manual Fourth Edition Second Printing Part No. 82297 with Maintenance Schedule.
Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual Copyright © 1993 by Genie Industries Fourth Edition: Second Printing, December 2003 "Genie" is a registered trademark of Genie Industries in the USA and many other countries.
Part No. 82297 Genie Super Hoist 1 Fourth Edition • Second Printing Operator’s Manual Safety Rules W arning Failure to obey the instructions and safety rules in this manual may result in death or serious injury . Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
2 Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual Tip-over Hazards Do not use this machine to lift people. This machine is intended for lifting material only. Do not stand on the platform. Do not raise the platform unless the machine is on a firm, level surface.
Part No. 82297 Genie Super Hoist 3 Fourth Edition • Second Printing Operator’s Manual SAFETY RULES Collision Hazards Do not lower the platform unless the area below is clear of personnel and obstructions. Do not raise the platform unless the load is centered and secured with rope or straps.
4 Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual Pre-Operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
Part No. 82297 Genie Super Hoist 5 Fourth Edition • Second Printing Operator’s Manual Pre-operation Inspection o Be sure that the operator’s manual is complete, legible and available for reference. o Be sure that all decals are legible and in place.
6 Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual Function T ests If any of the results listed under the following steps are not observed or any other malfunction is discovered, the machine must be tagged and removed from service.
Part No. 82297 Genie Super Hoist 7 Fourth Edition • Second Printing Operator’s Manual Platform Raise and Lower 9 Lock all four caster brakes. 1 0 Raise the platform by pressing the up button on the hand control. Result: Each tube should extend individually and smoothly.
8 Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual W orkplace Inspection Fundamentals The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.
Part No. 82297 Genie Super Hoist 9 Fourth Edition • Second Printing Operator’s Manual Operating Instructions This machine is intended for use as a material lift only. When new, the machine may be stiff due to tight seals and packings. The machine will function smoother after use.
10 Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual Manual Lowering 1 Open the manual dump valve on top of the hand control. Storage Instructions 1 Completely lower the platform. Close the CO 2 tank valve by turning the handle clockwise.
Part No. 82297 Genie Super Hoist 11 Fourth Edition • Second Printing Operator’s Manual Maintenance Schedule Maintenance Schedule Daily Inspect and, if necessary, tighten the following components: fittings, hoses, fasteners.
12 Genie Super Hoist Part No. 82297 Fourth Edition • Second Printing Operator’s Manual Decals Part No . Description Quantity 32305 Warning - Machine Safety 1 38149 Label - Patents 1 52980 Cosmetic.
Part No. 82297 Genie Super Hoist 13 Fourth Edition • Second Printing Operator’s Manual Genie Super Hoist 3.8 Height 41 in 1. 04 m Platform length 19 in 48 cm Platform width 24 in 61 cm Base width, corner to corner 53 in 1.35 m Load capacity 300 lbs 136 kg Lifting height 12 ft 5 5 / 8 in 3.
Distributed By: Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone + 61 7 3375 1660 Fax + 61 7 3375 1002 Genie China Phone + 8.
An important point after buying a device Genie 82297 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genie 82297 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genie 82297 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genie 82297 you will learn all the available features of the product, as well as information on its operation. The information that you get Genie 82297 will certainly help you make a decision on the purchase.
If you already are a holder of Genie 82297, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genie 82297.
However, one of the most important roles played by the user manual is to help in solving problems with Genie 82297. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genie 82297 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
